lowering

[benjer182]

i bought a 1.2 oasis of a mate last week and it has turbines on and is booked in to be lowered but it has turbines on 195/45/15 how low can i go i know its a 1.2 but i still have the 182 engine can i go 35mm all round any help will be greatly appreciated

[Lunner]

Mk1 clio i presume?

Not sure what you are on about with the 182 engine

Should be able to drop it 55mm easily

[benjer182]

that is a fat bit of dropige i have a 182 engine is wot i ment and mk1 yes will that rub with peeps in the back

[Lunner]

www.lunner.co.uk

RSi has same arches as 1.2 running 15's with 195/45 tyres and i've had 4 perople in there, only thing that scraped was the exhaust on teh ramp outa the carpark lol

[arj256]

You will be fine with 35mm as the turbines are the correct offset for a clio.
You could probably get away with 55mm if you dont mind your front arches

[Clio_GTT]

you have a 182 engine in your mk1 1.2 ?

[Matt_16v]

I went 55mm on my 1.2 Biaritz and that was on turbines with 195/45 R15 tyres. Sat perfectly and handled quite good too, allthough i did quite quite a lot of scraping on the rear....

[benjer182]

i have the engine but it aint in