1.8/2.0 inlet manifold

**Swervin_Mervin** · 21-03-2005, 18:08

Is one significantly bigger than the other?

Noticed on JB's Willy 1 that there seemed to be some eoom between his manifold and the cross member, but fark all on my valver.

**Winston** · 21-03-2005, 18:12

Think there the same?

My willy 3 and valver one were the same

**j3ned** · 21-03-2005, 18:15

the williams manifold and the 16v 1.8 are exactly the same - no difference at all

**Swervin_Mervin** · 21-03-2005, 18:16

So why the hell does my dipstick almost touch the cross member and yet the one in JB's willy 1 is probably 1-2inches fron the cross member?

Does the head sit further forward or summat?

**Winston** · 21-03-2005, 18:19

because 2live has a megane bottom end, so the dip stick is in abit of a different place.

**dannyt** · 21-03-2005, 18:21

i would say it's to do with the crash perhaps Mike?

**Swervin_Mervin** · 21-03-2005, 18:21

Soz, not 2Live. Johnny Brown aka Irish Nut.

**Winston** · 21-03-2005, 18:25

oppps....

Your dipstick tube could be bent forward?

**Swervin_Mervin** · 21-03-2005, 18:26

It's not just the dipstack though. The whole lot just seems closer to the x-member.

**VIPERONE** · 21-03-2005, 23:52

irish nut has had a bump iirc

Thread: 1.8/2.0 inlet manifold

Thread Tools

Search Thread

Display

1.8/2.0 inlet manifold

Similar Threads

Inlet manifold

Inlet manifold

Inlet manifold

Inlet Manifold

inlet manifold

Posting Permissions