HELP!!! Damn Injectors!

[Coops]

was all going so well n all! got 90 percent of the rest of the engine together tonight n went to put fuel rail n injectors in and this is what i found in the bags!







the one on the right has the little orange spray nozzle missing, god knows where it is but i need a replacement ASAP!!! can i get just the end bit or do i need the whole new injector?! if anyone can help me pm me or respond to this asap as i need the part before i can get the engine runnin, n its sposed to be done for friday!no reason just when i want it done!

Cheers people

Coops

[Rich]

the part does come off on its own, looks like you've unclipped the metal retainer clip for the plug on the loom for the injector too

[Coops]

rest of them are attatched to loom i think!!just pulled em off without thinkin bout it TBH....doh bloody amatuer! so do i need three of them clips n all thanku please?

Callin all breakers!!! i need next day special delivery of:

- call it 4 retaining clips for injector plugs
- one of them little orange spray nozzles n the washer between it and the 'o'
ring on the bottom of injector!

thankyou please :D

[Winston]

PM'd

[Rich]

check the loom forst as they should still be attached, then attach the other one sat round the injector

[Coops]

cheers winston mate....pm'd back!!

will do rich n then assess what i need!! :D

[BRUN]

if you want new 'o' rings ive posted the Bosch part numbers on here at some point before, and the injector part number aswell

[Rich]

check the old ones for cracks, if not just re-use them if necessary smear a little grease on them if they are being a pain to go back in the head

[Coops]

dont u drop em in just off the boil water to supple em up?!

they are all fine BTW, had em off when took em out, not a crack in sight!!

[Chris H]

the orange bit is called a pintle cap.

You can't get them off and re-use them unless you have the right tool, trust me on that one.

Use boiling water to soften the o-rings then roll them onto the injectors.