Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Forum User Jamie.'s Avatar
    Join Date
    Mar 2005
    Location
    Scotland
    Posts
    4,620

    oil temp/pressure on willy at constant 70.....

    went for a fair drive the other day, (100 miles) once up to temp, at a constant 70 it was at bout 82/83. when nailing it it got up to abt 90/95, bout mile uphill at abt 100 ish. what do other peeps get. the air temp btw was 15dc

  2. #2
    Forum User Tommo's Avatar
    Join Date
    Nov 2004
    Location
    Williams #0184
    Posts
    1,678
    Exactly the same mate, never goes over 100 tho, even when booting it. What type of oil do you use?

  3. #3
    Forum User Jamie.'s Avatar
    Join Date
    Mar 2005
    Location
    Scotland
    Posts
    4,620
    i was going up rhualt hill full pelt. i use 15w 40. it was 100 well just below the 100 line so abt 95ish i reckon. when going round town its usually abt 60/70. when giving it a little boot it gets up to 80 then back down to 70ish again when driving 'normal'

  4. #4
    Forum User
    Join Date
    Nov 2004
    Location
    Previously known as
    Posts
    5,443
    with mineral oil my temp would never exceed 100.. i have just put semi synth in and it runs at 110 on extended motorway runs....

    ive found mineral oil burns off quicker.... i thought my guage was buggered... lone behold i was almost out of oil lol.

  5. #5
    J o n
    Guest
    you wanna get some proper oil in it boys, ie the good stuff... Costco has served me well

    5w 40 and never goes about 80 and still holds 6 bars of pressure (5 once FULLY warm) at full load

  6. #6
    Forum User Martin's Avatar
    Join Date
    Sep 2004
    Location
    2.2 vtak yo! - Lancashire
    Posts
    6,583
    Never goes above 80 you sure the temp gauge ain't broke!? Mine is usually 100 on motorway or just below during normal driving.

  7. #7
    Forum User fasterthanjesus's Avatar
    Join Date
    Nov 2005
    Location
    Adelaide, South Aust
    Posts
    1,099
    5 40 oil.

    temp reaches 100 with heavy footwork.

    bar can reach about 6 depending on how cold, but sinks down to 3 or 4 when warm.

    i always thought a voltage gauge would have also been handy... especially in the winter when ive got all systems going (fogs, stereo, blowers, hrw, ipod, lights, ejector seat etc).

  8. #8
    Forum User Jamie.'s Avatar
    Join Date
    Mar 2005
    Location
    Scotland
    Posts
    4,620
    martin, in this cold weather mine wont go above 80 unless ur on a m way run. pottering abt it will stay around 70. when i ease off booting it it will generally go back to abt 70ish

  9. #9
    Forum User
    Join Date
    Mar 2005
    Location
    North Wales
    Posts
    131
    It's fine Jamie, mine before the oil cooler would run hotter than that.

    As long as it stays under 110 your fine....

  10. #10
    Forum User Martin's Avatar
    Join Date
    Sep 2004
    Location
    2.2 vtak yo! - Lancashire
    Posts
    6,583
    hot under the collar at donny!



 

Similar Threads

  1. Location of oil pressure & temp senders?
    By alex_e3 in forum Mechanical
    Replies: 10
    Last Post: 22-04-2007, 02:08
  2. Oil Temp & Pressure dials
    By CharlieG60 in forum Mechanical
    Replies: 2
    Last Post: 28-11-2006, 18:27
  3. Valver / Willy Oil pressure and temp senders
    By 1fast6 in forum Mechanical
    Replies: 3
    Last Post: 04-04-2006, 18:48
  4. oil temp and pressure
    By lankyboy in forum Mechanical
    Replies: 3
    Last Post: 20-03-2006, 17:34
  5. Oil Gauage TEMP and PRESSURE
    By Myers16v in forum Mechanical
    Replies: 2
    Last Post: 10-08-2005, 23:52

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •