I need to replace my rocker/cam cover gasket. I've removed all 16 bolts, pipes, plastic spark plug thing (and the 3 bolts holding it on) etc so there is nothing holding the cover on but I can't get the b&stard thing off!
I tried hammering a screwdriver in the corner and it went quite deep but I still can't lever it off. I know it can be done without removing the timing belt cover BUT has anyone got any tips for removal??? I'm asuming the old gasket is what's still holding things together.
Cheers,
Paul.
Results 1 to 9 of 9
Thread: Rocker cover removal HELP!
-
14-11-2005, 13:31 #1Forum User
- Join Date
- Jun 2005
- Location
- Williams no 161. Co. Durham
- Posts
- 29
Rocker cover removal HELP!
-
14-11-2005, 14:32 #2Forum User
- Join Date
- Feb 2005
- Location
- Sheffield - Rich aka BIG BIRD!
- Posts
- 2,682
should come off! may have been put on with gasket sealer which makes it harder! just make sure you lift the dizzy side first with the cam cover being on as the rocker has a slight lip on it to keep it under there but it shoudl come off a piece of piss!
-
17-11-2005, 14:40 #3Forum User
- Join Date
- Jun 2005
- Location
- Williams no 161. Co. Durham
- Posts
- 29
well its as stuck as a very stuck thing with lots of sticky stuff on it. It won't budge! Gonna book it in to my local garage......again!
-
17-11-2005, 19:31 #4Forum User
- Join Date
- Aug 2005
- Location
- Turbo'd Beastie
- Posts
- 9,955
sure mate? mine came off easy, it does get stuck at other end n all on vacum pipe! try gentle pursuasion with a crow bar, more levarage, but be dead careful not to damage ur head, that aint cheap to replace where asrocker cover is!!!
Coops
-
17-11-2005, 22:12 #5Forum User
- Join Date
- Aug 2005
- Location
- Southampton
- Posts
- 7,292
i had same problem, i got a flat bladed filler knife and went along the edge till it popped of :D
-
18-11-2005, 00:15 #6Forum User
- Join Date
- Mar 2005
- Posts
- 3,287
mine was badly stuck aswell first time
i hit it with a few things and just pulled by grabbing inside the plug holes
took me about 10 minutes or more, but it came off
-
18-11-2005, 16:46 #7Forum User
- Join Date
- Jun 2005
- Location
- Williams no 161. Co. Durham
- Posts
- 29
My local 'backstreet' garage have just tried and gave up! So I'm shafted!
I hammered a screwdriver in the corner nearest the battery, it actually cut right in to the rocker cover and I still couldn't lever it off.
Guess I'm gonna have to try cutting it all the round with a blade or something, but then if it still doesn't come off I really will be shafted.
Its frustrating!!! Only needs replacing cos I'm getting oil on top of the plugs.
-
18-11-2005, 19:33 #8Forum User
- Join Date
- Aug 2005
- Location
- Southampton
- Posts
- 7,292
use an engine hoist if its stuck that bad :P
-
18-11-2005, 23:49 #9Forum User
- Join Date
- Jun 2005
- Location
- Black Valver!
- Posts
- 159
nock it sideways with a rubber mallet?
worked for me
Reply With Quote
Similar Threads
-
Main Rocker cover & Cam belt cover
By Evogone in forum WantedReplies: 3Last Post: 03-03-2009, 21:57 -
rocker cover
By dan 16v in forum WantedReplies: 1Last Post: 03-05-2007, 23:09 -
Rocker cover and cam cover for sale.
By willy3ams in forum Items for SaleReplies: 14Last Post: 28-01-2007, 20:26 -
rocker cover removal / help
By Mattie in forum MechanicalReplies: 24Last Post: 16-10-2005, 17:58 -
My Rocker Cover
By VIPERONE in forum PicturesReplies: 15Last Post: 14-06-2005, 15:54
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts