For the few weeks the Valver has been running not very well low down the rev range, almost like (at high revs) when I had the IK on and had been sat in traffic for a while. 3rd, 4th and 5th were fine higher up the revs but low down it felt dead.

Anyway took all the breather pipes off today to clean them, aswell as the rocker cover to clean inside the breather unions. Noticed that 2 sensors had fell off from underneath the intake manfiold as the small metal U shaped clips had gone. Put them back on, ****in ell it feels completely different. At low revs it feels a lot sharper, and the pickup is a lot quicker.

As an aside, will it be damaging anything if I run without the rocker cover gasket. I have been doing for months, and I cant see any damage or leaking but if it will cause problems i'll fit one.

See ya

MAtt