Bonnet badge

[fabulicious]

There are some bonnet badge's up for grabs on ebay at the moment. Yer man says they measure 72mm by 60mm but I measured mine and it is 70mm by 55mm give or take a mm or so.

Whats the jackanory with them so?

http://www.ebay.co.uk/itm/Genuine-Ne...#ht_2922wt_754

[MatBrown]

Could be from a R19.

[FATBOY]

that is the correct part number for the bonnet badge. i bought one a while ago from this place...

[fabulicious]

For the 1 or the 3 FB? Are they all the same..

[FATBOY]

that was for the 1, im 99% sure there the same across the 3 models

[fabulicious]

Ah I know what it is..He is measuring from the back of the badge.

[snowman]

Some early J & K reg 16V models had a ribbed bonnet badge rather than the later smooth one,not sure the Williams 1 had any of these but they only have 2 pins on the back instead of the later 3 iirc.

Suppose this would only matter if youve replaced the bonnet from an early valver