considering breaking williams 2

[diathermy]

Hi guys,

As I can't get a new drive shaft for decent money, I am considering breaking the willy This depends on the amount of interest I get. Alternatively, if someone wants the car for 800 poundsn and can get it moved, that too would be an option!

Thanks

[cliokiz]

That's an absolute bargain! Why break for such an easy fix though?

You can use a valver driveshaft with a washer if you're struggling to find a replacement.

[diathermy]

How big a wahser?

I get confused!...if it is a shorter shaft, how will it get through the hub sufficiently to get the hub nut on and tighten it?

[cliokiz]

They're only very slightly shorter, you just need a washer to get them to fit properly so the CV joints aren't 'stretched'.



There was a group buy for some custom made washers on C16V - http://www.clio16valver.co.uk/forum/...p?f=51&t=42480

You need something around 10mm thick to put between the driveshaft and the hub and it'll fit fine.

[diathermy]

thanks mate,

that is really helpful.

i may be getting a willy drive shaft tommorrow, but cant be certain till i see it. if not, i will hop onto c16v and see if i can get the 10mm spacer.

[col]

AINT the r19 shafts, willys length ?

[cliokiz]

Slightly longer iirc

[jnl]

Hello do you sale the gearbox? how much for this?