Anyone got a REAL picture of the pivot bush on the clutch shaft(or wherever it sits) Cliokiz maybe?
Ta.
Anyone got a REAL picture of the pivot bush on the clutch shaft(or wherever it sits) Cliokiz maybe?
Ta.
Do you mean the nylon bush under the clutch fork?Originally Posted by fab
I think so Yanoo.
Have a look at this post..http://www.williamsclio.co.uk/forum/...highlight=fork
There is a dialogys showing the part as number 26.(bottom of page)
The thing is I dont recall seeing it whan doing the clutch. My fork only goes into the release bearing and nothing else?? could be why my gearbox is squeaking.
its in here somewhere
http://stores.ebay.co.uk/schakal16v
:P
Is it this thing here:
http://www.cliosport.net/forum/showthread.php?301699-Clutch-Fork-Pivot-!
?
Third post? or something else?
Yes, it's that. I have a spare JB5 gearbox at home, will take some pics tomorrow, if you think (I'm just designing a test bench for JB/JC gearboxes )Originally Posted by fab
Ok thanks chaps. I never replaced or lubed it when doing the clutch, so here comes gearbox out for the third time in as many months!
I have a funny feeling this is causing the squeak on the gearbox as when I depress the pedal the noise does go away.
What I will do is remove the fork and release bearing and refit the box. Start the car and if the noise is gone then it's pretty much that. I think
This bush should be greased during every clutch change. If it's "dry" it can cause squake and hard clutch pedal.
It has to be this causing the squeak Yanoo. The gearbox had no issues before the clutch change. Maybe just maybe I ran my finger over this bush just to see what it was and left it dry Looking forward to your test bench pics on the JB/JC. Did you see my post "gearbox maintenance"? There are some good links there
Surely. A friend of mine had similar issue, it was sorted out after the bush had been greased. Thanks for the links, they seem very useful.