Results 1 to 6 of 6

Thread: no start

  1. #1
    Forum User
    Join Date
    Apr 2010
    Location
    CHESTERFIELD
    Posts
    122

    no start

    used my clio last wednesday everthing was fine then come saturday tried to start it and it fired once then stopped saturday and sunday it started and run for 20 / 30 seconds then stopped monday it would run at 4000 rpm then stutter at about 2000 off its own accord then stop put a new coil pack on and now no ignition at all help please :(

  2. #2
    Forum User cliokiz's Avatar
    Join Date
    Oct 2006
    Location
    Leicestershire
    Posts
    1,673
    Is your ECU wet?

  3. #3
    Forum User
    Join Date
    Apr 2010
    Location
    CHESTERFIELD
    Posts
    122
    not sure ill check it

  4. #4
    Forum User
    Join Date
    Apr 2010
    Location
    CHESTERFIELD
    Posts
    122
    Yeah it is took the top off the ecu and poured the water out do I just let it dry or do I need to replace it

  5. #5
    Forum User Wobba's Avatar
    Join Date
    Sep 2006
    Location
    Willy1 217 & Mk4 220
    Posts
    9,195
    Obviously let it dry out. Check for scorch marks. You may be very lucky and it works but it's probably not.

    Dry it out in airing cupboard for 24 hours and give it a shot.

    Unblock the drain hole on that side of skuttle if it's that bad!

  6. #6
    Forum User
    Join Date
    Apr 2010
    Location
    CHESTERFIELD
    Posts
    122
    thanks people left it on the radiator this afternoon put it back together tonight everythings fine :D


 

Similar Threads

  1. no start up
    By preston420 in forum WilliamsClio Discussion
    Replies: 17
    Last Post: 20-05-2009, 22:41
  2. Car Still Won't Start!
    By JonnyK in forum Mechanical
    Replies: 7
    Last Post: 27-11-2007, 14:27
  3. Car will not start now
    By cliolord in forum Mechanical
    Replies: 3
    Last Post: 26-12-2006, 22:44
  4. The Start Up!
    By Coops in forum Pictures
    Replies: 13
    Last Post: 22-01-2006, 14:26
  5. Help Please! Car won't start
    By Jeeder in forum Mechanical
    Replies: 6
    Last Post: 19-03-2005, 13:45

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •