Williams ABS conversion

[James McMahon]

Hi my name is james had my clio williams 3 for about 6 months now and im sick of the abs fitted! Is it easy to just swap to non abs? i can do a bit with the spanners just hope this is easy to do any help or comments would be much apperciated thanks

[16v_paddy]

It's been done before, I think it's just a case of making up new pipes to bypass the ABS unit

[Coops]

get brake setup from a normal none abs clio, master cylinder, lines etc etc and bolt it all on then disconnect the abs sensors, rip out the abs unit and pull the bulb out the dash

[James McMahon]

Cheers many thanks will let you know of my progress once ive done this im going to buy a big set of brakes from k tec then hopefully this will stop me didnt get on with the abs lol

[zmaster2k]

get brake setup from a normal none abs clio, master cylinder, lines etc etc and bolt it all on then disconnect the abs sensors, rip out the abs unit and pull the bulb out the dash

exactly what i did

[vkosho]

Taking the bulb out the dash is vital as otherwise it will show a fault and fail MOT.