Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Forum User jay s's Avatar
    Join Date
    Aug 2005
    Location
    london---clio 16v hybrid
    Posts
    1,496

    few hybrid pics with new scuttle induction kit

    was off work this week so set about fitting my group a induction kit on to the hybrid, this set up was used many moons ago by renaultsport on the group a car back in the early 90's (most of the mk1 boys will probably know this) so i knew it would work well. it ended up being a bit of a pain in the ass to fit properly with lots of things needing moving and chopping but 2 days later and its done also took a few pics of the car and tried to do a decent vid but kinda failed due to wind noise and traffic lol... :D



    the car ..























    the scuttle induction kit ( v6 airbox ftw )



























    and a vid, excuse the wind noise and london traffic

    http://www.youtube.com/watch?v=Fg0q-WK7uag

  2. #2
    Subscribed Member LEIGH-ANNE's Avatar
    Join Date
    Jun 2005
    Location
    Southampton
    Posts
    4,446
    Ah so thats wot it looks like all fitted then! I picked one up from justin...not sure if its fitted yet mind.

    Very tight squeeze there!

    VLF sounding really nice there.....pondering my first track sess :P

  3. #3
    Forum User schakal's Avatar
    Join Date
    Oct 2006
    Location
    * Uncle Schakal * knitted by nanas since 1995 , now available with added GSOH
    Posts
    4,467
    chavy zorst noise spoils it imo .
    also whats in the ford ka ?? he pulled away pretty well there
    at 00:59 secs



    :P

  4. #4
    Forum User
    Join Date
    Aug 2005
    Location
    Southampton
    Posts
    7,292
    I sold it to him LA, there was no way it was going to fit my bay :(

  5. #5
    Forum User jay s's Avatar
    Join Date
    Aug 2005
    Location
    london---clio 16v hybrid
    Posts
    1,496
    la yeah as justin said i got it from him( cheers mate, it was never gonna fit in your bay ). its a bloody pain in the ass to fit and will definitely not be for everyone as it involves butchering quite a bit of the car to get it fitted correctly. does look good once done tho :D

    schks: chavy exh note lol its a MANS exh note the ka was running a 2.1 zvh conversion putting out around 370 atw, it was actually wheel spinning constantly as it was pulling away but you cant hear it over my chavy exh

  6. #6
    Forum User schakal's Avatar
    Join Date
    Oct 2006
    Location
    * Uncle Schakal * knitted by nanas since 1995 , now available with added GSOH
    Posts
    4,467
    Quote Originally Posted by jay s
    l
    schks: chavy exh note lol its a MANS exh note the ka was running a 2.1 zvh conversion putting out around 370 atw, it was actually wheel spinning constantly as it was pulling away but you cant hear it over my chavy exh
    you might think i am being a cnut but i was quite serious .
    with scuttle induction kit you are meant to hear the suction noise
    not the chavy corsa bad boi zorst IMHO .

    here is what i mean

    http://www.youtube.com/watch?v=t7hHJc9rz54

  7. #7
    Moderator
    Join Date
    Sep 2004
    Location
    Hinckley, Leics.
    Posts
    7,816
    Quote Originally Posted by jay s's dog
    What the **** are you looking at!



    Mat.

  8. #8
    Forum User jay s's Avatar
    Join Date
    Aug 2005
    Location
    london---clio 16v hybrid
    Posts
    1,496
    Quote Originally Posted by schakal
    Quote Originally Posted by jay s
    l
    schks: chavy exh note lol its a MANS exh note the ka was running a 2.1 zvh conversion putting out around 370 atw, it was actually wheel spinning constantly as it was pulling away but you cant hear it over my chavy exh
    you might think i am being a cnut but i was quite serious .
    with scuttle induction kit you are meant to hear the suction noise
    not the chavy corsa bad boi zorst IMHO .

    here is what i mean

    http://www.youtube.com/watch?v=t7hHJc9rz54
    the exh note is a combination of supersprint manifold, decat and mongoose exh sys chuck in some high lift high duration cams and things start to get very noisy exh side. not much can be done apart from changing parts which isn't gonna happen. my hillpower kit sounded exactly like your one but i didn't like it so sold it. mine sounds pretty much the same as this ( http://www.youtube.com/watch?v=PSSEL...layer_embedded) now when booting it apart from a slight reduction in " sucking sound" due to me still running the paper filter and the one on the vid has a green cotton filter. ive got a pipercross filter on the way so when that comes i'll get a better vid up :D

  9. #9
    Forum User
    Join Date
    Jun 2009
    Location
    Barn.S.Ley
    Posts
    136
    Is that a pitbull or a largish staffy?

  10. #10
    Subscribed Member LEIGH-ANNE's Avatar
    Join Date
    Jun 2005
    Location
    Southampton
    Posts
    4,446
    Quote Originally Posted by Slam
    Is that a pitbull or a largish staffy?
    Will more than likely be a staff. I 'think' that pitbulls arent actually aloud to be in public now without a muzzle..


    Anyways....carry on :D


 

Similar Threads

  1. Scuttle located Induction Kit
    By Imperial_16v in forum Performance/ECU Tuning
    Replies: 53
    Last Post: 09-11-2011, 13:38
  2. scuttle induction kit and 3s
    By walters300 in forum Wanted
    Replies: 16
    Last Post: 23-11-2010, 23:06
  3. Scuttle induction kit
    By cliokiz in forum Wanted
    Replies: 4
    Last Post: 01-11-2010, 15:42
  4. Scuttle Induction set up
    By Reecemcf in forum Performance/ECU Tuning
    Replies: 6
    Last Post: 26-10-2010, 19:30
  5. Scuttle Induction! pics
    By Mr.AdamB in forum Pictures
    Replies: 7
    Last Post: 28-10-2007, 11:05

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •