Brake Unions

**Flash Arghhh** · 02-04-2009, 20:13

Hello,
I'm fitting some wilwoods and i've got my rear braided hoses on and i've tried fitting the fronts but the unions are seized and rounded off (both sides) tried WD40 with mole grips, but no luck.

So i'm going to cut them off, but before i do i just want to know what unions i need.
Metric or Imperial? I'm guessing there pretty much the same size, right?

Cheers

**MAXIBOY** · 02-04-2009, 20:49

metric..10mm iirc

you will need a brake pipe flaring tool if you cut the unions off..

**Wobba** · 03-04-2009, 11:34

Fun job

Remember to put the new union on before flaring it hehe.

**Flash Arghhh** · 03-04-2009, 15:10

Aii will do.

**Tanks** · 03-04-2009, 15:37

Gonna have to do this aswell. Where can I get new unions? Only seen em in imperial measure.

**MAXIBOY** · 03-04-2009, 15:48

any motor factors..demontweeks..merlin motorsport..automec..

**Tanks** · 03-04-2009, 17:07

Found em on Merlin, coul;dn't find em on demon tweeks and were all imperial on rallydesign

**Flash Arghhh** · 03-04-2009, 17:48

eBay, cheapest place i bet.

**Tanks** · 03-04-2009, 18:24

click me

soz i'm newb, is this wot i'm looking for.

**richy** · 03-04-2009, 18:39

M10 X 1.5 unions iirc, completely replaced my system the other year!

Thread: Brake Unions

Thread Tools

Search Thread

Display

Brake Unions

Similar Threads

Brake unions: Seized

power steering rack pipe (green ones) or unions

Rear brake bias valve clunking when I hit the brake pedal?

Replacing Front Brake Lines or Fitting New Unions?

Brake Unions

Posting Permissions