ITB'd Clio on Superflow Autodyn 30 RR - playing around

[J o n]

Just a little vid of my Clio on the Superflow Autodyn 30 RR.

It made exactly 200.0bhp and 162.8lbs/ft of torque on a totally standard 100k engine. We were very pleased with the results. The most interesting thing was the torque was 130lbs/ft at under 2500rpm also... who needs Vtec? lol

Power at the wheels was 177.9bhp

http://www.youtube.com/watch?v=uvx6z...e=channel_page

some nice backfires and flames too...

[FlamingMonkey]

looking good, might keep up with a Williams now

[J o n]

lol, nah, it's still got full interior ;)

[northy]

good good - so whats happened since u sold the bodies ???

[stan]

Would have probably made more if you had an exhaust extractor!

[J o n]

good good - so whats happened since u sold the bodies ???

Put the bigger 45mm non tapered ones on, this was the result on a totally stock engine with no headwork, no BE work, stock unmatched inlets. 177.9bhp @ the wheels on 100k

Thought I might as well RR it while I was there, seeing as their new it would be rude not to! Gives me something to compare with in a couple of weeks when my Rotrex goes on :D

Would have probably made more if you had an exhaust extractor!

Yeah would probably have done, that and a MUCH bigger fan! They dont have all the bits through for it yet, still looking at uber fans and extractors and sealing the area off with soundproofing. I was pretty happy with the results... without wanting to blow my own trumpet mod for mod its the quickest 172 they have had on any of their rollers ... probably the closest to engine death too! :P

[kneesparks]

Does sound nice, would like some ITB's for the williams but cant justify the 2-3K cost

[stan]

drive one, you might change your mind...

[eternalife]

Yeah would probably have done, that and a MUCH bigger fan! They dont have all the bits through for it yet, still looking at uber fans and extractors and sealing the area off with soundproofing. I was pretty happy with the results... without wanting to blow my own trumpet mod for mod its the quickest 172 they have had on any of their rollers ... probably the closest to engine death too! :P

Dave Walker's / Emerald ECU set up is an Air Conditioned Rolling Road Room - wouldn't say it was sound proof although did have quite a bit of make up on the walls/doors.
Obviously they have a Fan and exhuast extractor too :D