hub sizes for alloys

[foshizzle]

ive got some alloys and the bores are too small to fit over the 60.1mm hubs on my clio, they are 56mm bore instead.

can anyone suggest a tool to enlarge the bores? I have done one with a dremel but took ages, can you get some kind of 60mm boring tool or like a 60mm drill bit thing?

[cliorod]

Take them to a small engineering machine shop,they will clock the existing bore true,and then open them up to 60mm.
It is important that , the bore be concentric to the wheel rim ,probably cost about £5 a wheel.If you were nearer,I would do them for you
Not a very good idea to use a Dremmel,file or grinder,as you will lose the location and concentricity

[busterhymes]

cant believe you tried a dremel to do a job like that

[Coops]

ask winston about that, believe the BBS for the illiams were done in a similar fashion, pikey it for the win

[busterhymes]

unbelieveable lol

[schakal]

yeah dremel is the pikey way tbh
take them to a machine shop it only cost me 30quid for the lot .