Clio 1.2 with 1.8 16v Engine

[danclay]

Renault Clio 1.2 with 1.8 16v engine

For sale is a Renault Clio 1.2 with a Renault Clio 1.8 16v engine in out of a vavler. The car is registered as a 1.2 on the logbooks. This can be made into a tidy car with a little work.

General:

* N reg
* 1.2 on logbook
* Shell has done 60k
* Engine has done 95k, but has a full service history with it. No expense has been spared on the car the engine came out of, including work on the engine.
* Tax till Jan, No MOT


Exterior:

* Full Respray in white.
* Clio Williams bonnet and front arches
* Debadged bonnet and dewipered boot


Interior:

* Standard Interior


Suspension

* Lowered all round on Koni springs and shocks (Not 100% sure on the make, but certainly aftermarket parts)


Brakes

* Renault 5 GTT calipers and new discs


Wheels and Tyres

* 16" Megane Sport? alloys refurbed black
* Brand new Yokohama S Drive tyres


Engine

* 1.8 16v
* Semi-Enclosed induction kit included with sale
* Aftermarket exhaust system
* Starts first time, good runner

Other:

* Brand new clutch fitted


Bad points:

The car has a few bad points, but dont let these put you off, they are easy fixes

* The injector rail has a leak, i think this is due to it not sealing properly. Previous owner has tried to seal but not worked very well.
* The front calipers leak so would need looking at.
* There is no throttle cable connected, but a brand new throttle cable kit is included with the sale
* The steering rack has some play in it, common problem with clio's, a spot weld sorts this problem out
* The bottom of the arch on the passengar side has snapped (see pic) Its not major, and the snapped off piece will be included so it can be repaired
* The paint on the alloys has started to flake a little (see pics)
* The bonnet release catch inside has snapped off its mounting, but still opens the bonnet.


I think that is all. If not, feel free to ask me any questions. The car would need trailering/towing away as the MOT has expired, and obviously wouldnt go very far as the throttle cable is not connected.

£800

[bass_direct]

The injector rail has a leak, i think this is due to it not sealing properly. Previous owner has tried to seal but not worked very well

bet they forgot the copper washer?

[danclay]

They could well have done.

Now on Ebay:

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=120336241214

[danclay]

Didnt sell on ebay due to a timewaster.

Lowered the price to £400 ONO

Bargain!!