Page 1 of 8 123 ... LastLast
Results 1 to 10 of 71
  1. #1

    Welcome valver owners, Tell us a little about your car.

    Welcome valver owners, are own forum, cheers Fatboy

    Heres my spec, hope to see yours below soon, what you have planned

    Engine
    2.0 16v F7R williams 3
    Scorpion s/s exhaust
    PiperX filter
    Magnorecore leads
    Polished cam cover and inlet manifold
    Bailey header tanker

    Bodywork
    Phase2 rear lights and strip
    de badged
    single wiper
    focus bee sting aerial
    fog lights, side strips, grill removed
    meshed front bumper
    Mattig DTM mirrors

    On its way - Carbon bonnet

    Suspension, Wheels & Tyres
    Williams wishbones, ARB and driveshafts
    JR coilovers
    BB tuning cross drilled discs
    Pagid fast road pads
    Goodridge brake lines
    Clio cup strut brace
    Ronal Turbos 7x15
    Michelin Exalto 2 195/45/15
    Manual steering rack

    Interior
    Cobra Imola bucket seats
    330mm sparco ring steering wheel
    Sparco carbon fibre pedals
    Williams carpet/boot carpet

    Cheers
    Winston




  2. #2
    Forum User 2 live's Avatar
    Join Date
    Sep 2004
    Location
    out there somewhere
    Posts
    7,399
    hehe welcome ....

    found a l'il vid clip of me old valver on kazaa the other week....do a video search for astra gsi vs clio 16v

    i loved that car lol

  3. #3
    Thank you 2live lol will have a look on kazaa

    Hope everyone got my PM

  4. #4
    BigOjs
    Guest
    Spec for my Valver:

    Megane bottom end
    Head work
    Cams and pulleys
    Full Mongoose exhaust and de-cat
    Off the shelf chip

    Missing a front bumper at the moment.

    Looking forward to being a part of this new site

    OJ

  5. #5
    Forum User
    Join Date
    Jan 2005
    Location
    East Yorkshire
    Posts
    149

    My 16V

    A few of you might know me from cliosport.
    My valver changes appearance alot due to the amount of wheels i have in the garage. Nothing special has been done to the engine due to insurance reasons.

    Spec
    Engine
    Standard (A possible transpant with a 1.8 clio cup engine)

    Suspension, Wheels & Tyres
    Lowered 35mm alround
    17" Tooras
    Nankang NS-1 Sport tyres
    15" Williams Wheels in black
    Avon ZV1's

    Interior
    Special '16v' Corba Buckets
    330mm Sparco wheel
    One sparco pedal lol

    ICE
    False Floor
    MAC Audio Z2100 amp
    Reflex 300 Sub
    Magnat classic 213's
    Pioneer P6100R HU with 6 disk changer
    (All can be removed for track days etc)


    This is what it currently looks like!

  6. #6
    Banned
    Join Date
    Oct 2004
    Location
    * B A N N E D *
    Posts
    7,104
    I love those balck wheels. Are they just black Williams wheels? Im tempted to get a second set and paint them black.

  7. #7
    Allo, another one from cliosport! Looks like a good site! Anyway Car specs:

    1993 Clio 16v, originally brought for £450 a year ago

    Now has:

    Engine:

    2.0 16v F7R williams 2 engine using 16v exhaust manifold and gearbox,
    decat pipe, magnex backbox, ramair pannel filter in custom airbox fed via green airfilters 80mm heavy duty ducting, magnicore leads and NGK platinum plugs. Hillpower uprated dog mount.

    Suspension:
    Boge gas shox all round using unknown make of lowering springs ~35mm. (soon to be replaced). Torsion bar lowered to match the front.

    Interior:

    Full black leather form a renault 19 16v executive, matching door cars, momo steering wheel, williams clocks, phase 2 heater pannel.

    Brakes:

    black diamond front disks with ferrodo pads dot 4 fluid, drilled and grooved rear disks with green stuff pads.

    Body:

    Both sides, bonnet and front bumper resprayed in 449 blue, both doors delocked, williams spoiler, phase 2 front grill, rear lights and boot strip.

    To come:

    supersprint exhaust manifold, cams pullies and a suitable map. Maybe 16" image wheels!


    Thats about it.

    Steve.

  8. #8
    Banned
    Join Date
    Oct 2004
    Location
    * B A N N E D *
    Posts
    7,104
    Lets get some pics up hey steve lad. :D

  9. #9
    Forum User Martin's Avatar
    Join Date
    Sep 2004
    Location
    2.2 vtak yo! - Lancashire
    Posts
    6,583

    Re: My 16V

    Quote Originally Posted by Waitey
    A few of you might know me from cliosport.
    My valver changes appearance alot due to the amount of wheels i have in the garage. Nothing special has been done to the engine due to insurance reasons.

    Spec
    Engine
    Standard (A possible transpant with a 1.8 clio cup engine)

    Suspension, Wheels & Tyres
    Lowered 35mm alround
    17" Tooras
    Nankang NS-1 Sport tyres
    15" Williams Wheels in black
    Avon ZV1's

    Interior
    Special '16v' Corba Buckets
    330mm Sparco wheel
    One sparco pedal lol

    ICE
    False Floor
    MAC Audio Z2100 amp
    Reflex 300 Sub
    Magnat classic 213's
    Pioneer P6100R HU with 6 disk changer
    (All can be removed for track days etc)


    This is what it currently looks like!
    Looking good that mate, the new wheels are much better IMO.

  10. #10
    Banned
    Join Date
    Oct 2004
    Location
    * B A N N E D *
    Posts
    7,104
    Like the white *slag* writing on the side walls


 

Similar Threads

  1. badge thing for you valver owners
    By rob-legend in forum Ebay
    Replies: 0
    Last Post: 08-12-2007, 20:36
  2. FAO VALVER OWNERS
    By Gav in forum Off Topic
    Replies: 34
    Last Post: 16-02-2006, 10:30
  3. a Williams / valver owners worst nightmare!
    By Mattie in forum WilliamsClio Discussion
    Replies: 17
    Last Post: 11-10-2005, 23:23
  4. FAO Naples valver owners
    By Winston in forum WilliamsClio Discussion
    Replies: 5
    Last Post: 28-05-2005, 18:48
  5. We need more valver owners
    By Winston in forum WilliamsClio Discussion
    Replies: 30
    Last Post: 07-04-2005, 22:43

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •