Clio mk1 1.1 to 1.816v

[Jaymzfc]

Hi Guys, first post so here goes.
I'm from Malta so getting parts is'nt easy i generally pop over to the UK and ship stuff over. (You might ask why dont i just buy a ready williams or 16valver well we have a 75% tax on older imported cars)
I'm currently in the proccess of coverting my 93 mk1 1.1 into a 1.8 16v, i got most of the interior sorted and on the way is a 18.16v engine with gearbox. i have all the wiring loom, dials, ecu etc etc the engine is coming with engine mounts/gearbox/driveshafts.
Already fitted are the front discs and rear discs.

Now here's the question.
Will i be able to drop the thing right in or will i have issues???

Any help or advice would be great guys

tks
James

[MAXIBOY]

no issues except a few wiring ones as they alter between phases..

[FATBOY]

congrats jay. for being our 3,000th member!!!! good luck with your project and enjoy your stay!!!! :D

[16v_paddy]

congrats jay. for being our 3,000th member!!!! good luck with your project and enjoy your stay!!!! :D

I was watching the numbers last night with interest

As said above m8, just wiring issues and the usual hands getting cut to pieces

[Jaymzfc]

Cheers for the warm welcome guys.

I have all the wiring both engine and dashboard so hopefully i wont have too many issues with that.
Will let you know if i get stuck with anything,

Thanks again


( If any of you happen to come to Malta email me we'll have a pint)

[rob_887]

Just get it in there ;). if there is any wiring issues they can be sorted. Easy enough.

[Jaymzfc]

The engine isnt coming with a subframe could i use the one off the 1.1 ??

will the drive shafts match the hub from the 1.1??

will i need to change the front suspension units???

Any other things that are a must please let me know.

tks again

james