COMPLETE manual steering conversion for 16v/Willy/RSI

[u33db]

I have a kit to remove PAS available.

It consists of;
- manual column,
- manual rack,
- new track rod ends,
- 2 aux belts of marginally different length (one 16v/willy, one RSI but both 6 rib - either should fit TBH),
- alternator brackets powdercoated red.

Brackets pictured below;


This is everything you'll need so no fannying about down the scrappy to get a rack/column like the usual deals!

Looking for 150 delivered?

Will throw in the 16v alternator (http://www.williamsclio.co.uk/forum/...ic.php?t=32224) i was using for an extra tenner if no buys it outright first.

[16v_paddy]

why do these things come up for sale when I'm skint

[u33db]

Get saving then mate!

Surprised this hasn't gone yet...

[midge]

have you used this lot? i.e does it definately work? tried the belt e.t.c ?

[u33db]

Not fitted the column/rack but they're in sound nick.

Had the alt brackets on my RSI with the longer belt and it worked fine. RSI has a bigger crank pulley hence the longer belt (which i bought and used) so the shorter one will fit a 16v/willy.

As stated however, theres not much difference in length between the 2 so either should fit a 16v/willy setup...i can get sizes if you want to check against someone who uses this setup already?

[midge]

yer, ill buy it iff i know 100% it will work properly.

[u33db]

No worries, will get the belt length tonight.

Belt/brackets came from Crossers btw - http://www.williamsclio.co.uk/forum/...614&highlight=