Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Speeds in gears

  1. #1
    Forum User
    Join Date
    Jun 2008
    Location
    North Devon
    Posts
    31

    Speeds in gears

    Hi all.
    I've just had reconditioned box fitted to m williams 2 and I dont think the ratios are correct. What speeds should I be able to achieve in each gear?
    Mine roughly does:
    1st = 30mph
    2nd = between 55 and 60mph
    3rd = just under 80 mph
    4th = ?
    5th = at 5500pm it's doing 105mph, surely this one isn't right?!

    Cheers
    Marti

  2. #2
    Forum User 1995clio16v's Avatar
    Join Date
    Dec 2006
    Location
    Project HYbrid 2015!
    Posts
    1,788
    Im no gear guru,

    but I was sure only 16v (JC3) boxes did 60 in 2nd and willy (JC5) needed 3rd for 60 or is that a myth?

    Is it definately a willy box?

    I know that doesnt answer your question entirely but i was just curious..

  3. #3
    Forum User
    Join Date
    Sep 2004
    Location
    The Ultimate Driving Machine.
    Posts
    6,323
    the williams will only do 58ish in 2nd due to low rev limit, and 80 in 3rd, about 100 in 4th, all on std limiter, 16v does more due to limter more then owt!

  4. #4
    Forum User 1995clio16v's Avatar
    Join Date
    Dec 2006
    Location
    Project HYbrid 2015!
    Posts
    1,788
    Quote Originally Posted by richy
    the williams will only do 58ish in 2nd due to low rev limit, and 80 in 3rd, about 100 in 4th, all on std limiter, 16v does more due to limter more then owt!
    Oh right, so its more to do with the limiter than gearing?

  5. #5
    Forum User Duli's Avatar
    Join Date
    Mar 2006
    Location
    Novo mesto, Slovenia, EU
    Posts
    78
    Probably, because you reach the limit 600 rpm`s quicker with the will than with 16v.

  6. #6
    Forum User
    Join Date
    Mar 2006
    Location
    Lancashire
    Posts
    1,181
    Formula enclosed for Speed etc.
    Wheel revs per mile can be got from the tyre manufacturers.

    FORMULA :- 60 X R.P.M
    WHEEL REV’S/MILE X AXLE RATIO X G/BOX RATIO

    AXLE RATIO = FINAL DRIVE

    GEARBOX RATIO = WHAT EACH GEAR IS.

    I have posted replies to similar questions on here.As well as gear ratios etc etc ~ the dimension of the tyre can play a big part.I have low profile 40/45 x17" diameter tyres,that have the same diameter as a tall 60/65 profile 15" ~~ which obviously determines the speed.
    I hope the above formula is of use to you.
    Rodders.

  7. #7
    Forum User
    Join Date
    Sep 2006
    Location
    Barnsley
    Posts
    2,109
    I get in the 1.4 16v corsa.

    This is limiter bouncing.

    1st-30mph.
    2nd-50mph.
    3rd-75mph
    4th-90mph
    5th-115mph.

  8. #8
    Forum User Allan's Avatar
    Join Date
    Mar 2005
    Location
    Williams land!
    Posts
    2,509

    Re: Speeds in gears

    Quote Originally Posted by martinh
    Hi all.
    I've just had reconditioned box fitted to m williams 2 and I dont think the ratios are correct. What speeds should I be able to achieve in each gear?
    Mine roughly does:
    1st = 30mph
    2nd = between 55 and 60mph
    3rd = just under 80 mph
    4th = ?
    5th = at 5500pm it's doing 105mph, surely this one isn't right?!

    Cheers
    Marti
    Can't remember but around 6600 / 7000 ish the needle is up close to the 135/140 so 105 sounds a bit low, clutch slipping ?


    i get 80 at 3500 and around 100 at 5000, don't really tend to be looking at the rev counter after that its more eyes on the road :S

  9. #9
    Forum User Matty86's Avatar
    Join Date
    Sep 2006
    Location
    Essex
    Posts
    1,536
    105 in 5th at 5500rpm (assuming ~ 195 50 15 tyres) suggests that you have a JC5 028 or 029.

    these are from the mk1 Lagunas I think, (B56)

  10. #10
    Forum User Andyvalver's Avatar
    Join Date
    Mar 2005
    Location
    Naples Beast Derby
    Posts
    3,631
    Not sure what i get in the coupe.

    60 in 2nd

    90 in 3rd

    120 in 4th

    dunno in 5th 130 +


 

Similar Threads

  1. Motorway speeds
    By Ben Nichols 1979 in forum Mechanical
    Replies: 25
    Last Post: 16-03-2012, 16:43
  2. What speeds...
    By dannyt in forum WilliamsClio Discussion
    Replies: 10
    Last Post: 25-01-2009, 19:54
  3. Roughly what top end speeds and 0-60 times do you get?
    By seanofnp in forum WilliamsClio Discussion
    Replies: 57
    Last Post: 18-06-2006, 21:35
  4. Top Speeds
    By Zollo in forum Off Topic
    Replies: 32
    Last Post: 05-09-2005, 17:46
  5. What speeds does everyone normally do?
    By dannyt in forum WilliamsClio Discussion
    Replies: 12
    Last Post: 22-02-2005, 08:27

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •