Sytec UPRATED - williams fuel pump! **SOLD**

[northy]

Bought in error for my cup racer (mine is a early phase 1 tank) and now unwanted and they wont accept it back.

TOTALLY BRAND NEW

Ideal for any williams and any phase 2 valver with the fuel pump and sender all in one unit.

I paid £90 for it from demon tweeks. I will open bids at £60 guys.

Im able to post straight away. Simple to fit just two parts to swap.

And it will make it quicker as there is a filter in the pump so if yours is clogged up

[evouk]

will it suit mine..... :D

[northy]

not sure mate, as yours is the same car as mine....91 spec clio.

Post me a pic of where the rear seats should be....i will be able to tell from that. But if u got a williams tank (sender and pump in one) then it would fit!

[stevie_b]

Might be interested too. If I pull out the current pump and take a pic of it will you know if it will fit?

[northy]

On my tank i have a seperate sender and a seperate pump. To acsess the pump u need to drop the tank.

If your pump can be acsessed through the standard access panel my pump will fit.

Will look forward to a pic

[stevie_b]

OK. Evenings are a bit lighter these days so I'll get cracking on it (once it stops snowing )

[BristolSam16v]

Is it the smaller size pump to fit models with the sender/pump in the same place? You can still fit it 2 earlier ph1 models just need something to wrap it in like a bike tyre inner tube (what I used on mine).

[northy]

Ref number is FSEITP147

[jay s]

im interested in this mate but will let you know on the weekend as i have to try another pump first to see if it cures this lean problem, if the pump i burrow sorts the problem then ill ahve this off you if you still have it. oh and as said it can still be fitted to your cup car ( i had the same setup on my first clio and transfered the uprated pump over to the new one with ph2 setup :D )

[northy]

nar jay - mine is staying true to phase one mate.....

Jay this is ideal for u mate....get it bought !