clio williams 3

[richy]

not quite a race lol, but..... after 2.5 month of not driving the clio, finally got to take her for a spin round the estate and it runs great! 4pots on feels good , need bedding in properly like, sat on floor almost with bucket seats and noisy as lol(no interior at all) love it long run needed shortly not use to the power :D

[2 live]

bout fukkin time too hehe

[richy]

lol i know, nice ot drive something that can get to 70 without hassle!!!

[Mark_Ritchspeed]

Lol, are you turning it into a track only car? What with 4pots, stripped interior, 200lb springs.

Theres no stopping once you start. :D

[richy]

Lol, are you turning it into a track only car? What with 4pots, stripped interior, 200lb springs.

Theres no stopping once you start. :D

track car me would i! cant do that to a williams lol

:P bring on the fun

[richy]

[Mark_Ritchspeed]

What are your harnesses connected to at the rear of the car? At least they seem to be at a safe angle, unlike the ones that always seem to get fixed to the rear seat-belt fixings.

[Rich]

the top rear seatbelt holders

[richy]

there bolted to the higher rear belt points, i know they should be at more then 20degree angle from hozrizontal after leave seat! so fitted them there, that and my spare wheel strap is going on lower mounting point

[Mark_Ritchspeed]

What would be even better, would be a substantial bar mounted across between the 2 fixings. Then you could just loop them through the bar and they would be completely straight and pull evenly. Would also act as an extra brace to stiffen up the rear.

Or buy a 17 point Safety Devices cage with extra cross bar for the proper job.