Front Bumper on Pins

[AndyFielder]

Anyone done this?

Anything i should look out for, planning on doing it on the track car.

Andy

[MatBrown]

Summeh's cup car has a pinned front bumper.


Mat.

[Lunner]

[cliorod]

Looks like a good job ~ If anyone has details on what is required I too would be interested Looks like a very good "mod" for the Rally car.

[AndyFielder]

i want to use aerocatch's unsure if they will fit ok.

[summeh]

It's very easy, you just need to drill 4 holes in the metal bumper bar underneath, two either side, and two on the front either side. Bolt your pins in, slot the bumper and jobs a gooden.

It makes working on the front of the car a lot easier, bumper comes off within a few seconds.

Would have thought a rally car would already have this rod? Do the back bumper as well while your at it

[stevie_b]

you just need to drill 4 holes in the metal bumper bar underneath, two either side, and two on the front either side.

Are you using six pins to hold the bumper on?

[stan]

It's very easy, you just need to drill 4 holes in the metal bumper bar underneath, two either side, and two on the front either side. Bolt your pins in, slot the bumper and jobs a gooden.

It makes working on the front of the car a lot easier, bumper comes off within a few seconds.

Would have thought a rally car would already have this rod? Do the back bumper as well while your at it

[stevie_b]

Yes, sorry I missed the bit about the front ones being done two on either side as well. 8 pins sounds like overkill to me though. Think I'll go with Lunner's method as it looks like you can get away with just 4.

[summeh]

Yes, sorry I missed the bit about the front ones being done two on either side as well. 8 pins sounds like overkill to me though. Think I'll go with Lunner's method as it looks like you can get away with just 4.

Oh well excuse me! That should have clearly been a hyphen and not a comma. Next time, I just won't bother