Tightening torques

[spryboy1974]

Can anyone please tell me what the torque settings are on a willy lump.

Mains,big ends,head bolts and cam carrier. :D

[MAXIBOY]

Mains 60 to 65 nm

Big Ends 40 to 45 nm

Cam Carrier 8mm 24nm
6mm 10nm

Head Bolts Stage 1 30nm
Stage 2 angle tighten by 51 degrees +- 3 degrees
Stage 3 wait for 3 minutes minimum
Stage 4 loosen all bolts completely
Stage 5 25 nm
Stage 6 angle tighten by 108 degrees +- 3 degrees

[spryboy1974]

Thanks a lot Maxiboy,appreciate that! :D :D :D

[richy]

i agree with the mains settings, but im pretty sure the big ends are 40 - 45nm?

[MAXIBOY]

^^^^^^

yes there are misread them....

can they be altered then by a mod and added to the guides maybe.

thanks richy mate

[richy]

np only reason i noticed was i fitted my crank/rods just the other night!!