locking wheel bolts with willy wheels

[geesus]

has anyone got a set of mcgard locking wheel bolts?

i want some for the valver so that no pikeys run off with my wheels

however i will need standard length on the back and longer bolts on the front as im using spacers

can anyone tell me the standard length, seat angle, width, thread pitch etc so that i can order the correct ones

i know its a long shot but worth a try

[BRUN]

they are M12x1.5 bolts

[stevie_b]

Having just converted to studs I have most of the info you need... The width is M12, the thread pitch is 1.5, the seat is 60 degree tapered. Only thing I didn't check on the old bolts was length, as that wasn't relevant to my studs, but I'm guessing it was 50-60mm (thread) but if you have your current ones best to just measure that figure on yours.

[geesus]

exactly what i was after, thanks to both of you :D