Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Oil Pressure

  1. #1
    Forum User Clio-Girl's Avatar
    Join Date
    Jan 2007
    Location
    www.clio16valver.co.uk
    Posts
    684

    Oil Pressure

    Ive done a search and cant find the answer im looking for unless im just not looking hard enough!

    What is the oil pressure guage supposed to read? as im worried mine is a bit too low and after spending so much on the engine im very wary!

    Thanks guys!

  2. #2
    Forum User Clio-Girl's Avatar
    Join Date
    Jan 2007
    Location
    www.clio16valver.co.uk
    Posts
    684
    id also like to know what other peoples guages are reading...

  3. #3
    Forum User Wobba's Avatar
    Join Date
    Sep 2006
    Location
    Willy1 217 & 172 Ph1
    Posts
    9,194
    What is yours showing?

    From what I know, around 3 Bar is the norm. Things like ambient temperature and stuff will have an effect, e.g the hotter it is the higher the pressure will likely be. I am no mechanic though.

  4. #4
    Forum User Clio-Girl's Avatar
    Join Date
    Jan 2007
    Location
    www.clio16valver.co.uk
    Posts
    684
    it varies from 2-2.5

  5. #5
    On start up mine goes up to 5 or 6.

    When hot it idles at about 0.3 lol

    Difficult to tell when I'm driving as it gets stuck in the middle and doesn't move unless you tap it LoL but I think it's around/just under 3 when driving normally, and goes about 3.5 when tanking it on the motorway

  6. #6
    Yep. 3 at cold idle rising to 5-6 on the move.

    Once warm it idles at just over 0 and reads about 2-3 normal driving and a bit more when ragging it.

  7. #7
    Forum User Scougar's Avatar
    Join Date
    Feb 2007
    Location
    West Devon
    Posts
    889
    If your using fully synth or a very thin oil then it may read lower than it is supposed to. It may also mean you need a new oil pump :(

    Mine goes to 3bar at 3000 revs when cold, 1-2 when idling at cold, 2.0 2.5 when at 3000 when warm/hot and zero or just over when idling when warm/hot. I am using fully synth which may be too thin, especially on an engine that has over just over 100k on the clock.

    Reminds me, some guy in Launceston Tesco offered me some clio bits. A highly modded 1.8 engine and other stuff. If it was 2.0 I might have been interested, but if you hang around launceston with your clio you may find a new oil pump... attached to a decent engine lol.

    Matthew

  8. #8
    Forum User C5 SWH's Avatar
    Join Date
    Aug 2007
    Location
    Paignton, Devon.
    Posts
    88
    5-6 on cold start

    1-2 bar on warm idle


  9. #9
    Fully synth on an old car is utterly pointless. Might as well give me the money.

  10. #10
    Forum User AndyFielder's Avatar
    Join Date
    Dec 2006
    Location
    N/A
    Posts
    2,084
    should get oil coolers chaps! :D ;)


 

Similar Threads

  1. oil pressure when (quite) hot
    By djtlane in forum Mechanical
    Replies: 15
    Last Post: 01-05-2010, 23:34
  2. oil pressure
    By Rory in forum Mechanical
    Replies: 6
    Last Post: 04-02-2008, 20:11
  3. low oil pressure.....
    By fiveyards90right in forum Mechanical
    Replies: 8
    Last Post: 10-06-2006, 18:23
  4. oil pressure
    By gozziee in forum WilliamsClio Discussion
    Replies: 8
    Last Post: 29-05-2006, 11:38
  5. Oil Pressure
    By Lunner in forum Mechanical
    Replies: 7
    Last Post: 25-05-2006, 20:20

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •