Track rod ends

[Matty86]

I've got a willy widertrack on the valver and I need some longer track rod ends


are the williams track rod ends longer than the 16v ones? or do people just use the 16v ones? I find they're wound out too far for my liking :/

who sells williams track rods ends - is it a reno only job - roughly how much am i looking at?

also, are the rods themselves a male end? I've got some from ECP that are female end, and far too long!

[richy]

ECP do sell them, there a FEBI bilstein product, identical to williams ones and fit perfect, both my 16v(widetracked) and williams have these on

[Lunner]

Ends depend on which track rods you have on the car, normal 16v ones are fine, i'm running a manual rack and rods, ends have a male end and still got about 10-15mm of thread in the track rod

[Matty86]

I'm running a standard 16v PAS rack with 16 track rods


ive only got about a cm i reckon left on the track rod ends :(

[MAXIBOY]

thats about normal. get some willy ones then.

[finlay]

i had to end up buying new tie and track rods for each side because the track rod snapped off inside the tie rod, both sides, 160 quid from renualt

cheers

[Lunner]

Should have gone to GSF and got valver parts

[Matty86]

GSF don't sell williams ones :(



Can anyone confirm on the ECP website which ones are for a williams? - There are no ECP stores local to me :(


Reno wanted about £40ea iirc...

[Lunner]

use valver ones

[Matty86]

they're wound out too far for my liking