Williams 3 Alarm

[Jimbo5000]

Hi All,

I was just wandering, has anyone got the full manual for the standard Cobra Alarm on the Willy 3? My alarm system has started to play up a bit and just wanted to check what all the beep sequences mean.

What used to happen is:

Lock the car: two short beeps
Unlock the car: one short beep then one long one.
Turn off the ignition: one short beep.
Turn on the ignition: no beep

What happens now:

Lock the car: two short beeps (as normal)
Unlock the car: one short beep
Turn off the ignition: one extreamly short sound (can't really class it as a beep)
Turn on the ignition: An intermittant beep that runs for about 10 seconds (continues even if you start the engine)

I have tested the alarm itself, opening the doors etc and that all still works. Though thinking about it I havent tested if the immobiliser kicks in yet.

Has anyone got any ideas? Any help would be appreciated

Thanks

James

[MAXIBOY]

they seem to go faulty and they usually tend to replace them with a toad cat 1.

[FATBOY]

http://www.williamsclio.co.uk/forum/...ic.php?t=11207

sounds like someone has flicked the valet switch... its under the glovebox compartment! try that and let me know

[ae]

sounds like someone has flicked the valet switch.

Yeah thats the problem just flick the switch.

Andrew

[madman1981]

now you know what that switch is for Jimbo lol

[Jimbo5000]

Thanks for ya help guys, it was the switch that was the prob, what is really the point of having that switch really??

[FATBOY]

its for valeters or garages when servicing so that the vehicle will not go into passive immobilisation.