Wheel Bolts

[Coops]

whats the spec of standard clio 1.8 16v wheel bolts? diameter, thread pitch and length?

i need to get elongated bolts for my 15mm per side spacers so need to know what the std is and go from there!

thing is i want matching bolts and locking ones aswell, so i'll need 6 standard chrome bolts and 2 standard length locking bolts for rears then 6 long bolts and 2 long locking bolts that match the rear locking nuts. think am askin bit too much!

[MAXIBOY]

could buy a full set and trim the rear ones down. or demon tweeks do a stud conversion in different lengths so you could convert them all to studs then fit matching wheel nuts and locking nuts. i think there m12 x 1.5 but i,ll can check later.

[Coops]

i checked the pitch, they are 1.5's but is thread diameter from max width of thread or minimum(i.e. shaft width?) as i got shaft width as 10mm so M10 but not sure?

[MAXIBOY]

def m12. wasn,t 100% sure on pitch

[Coops]

cheers matey, pitch is definatly 1.5, i'll sort summit!

[MAXIBOY]

try tweeks they have all sorts

[Coops]

sorted fella, found random place that sells any fitment, just choose seating, pitch, thread diameter and length!

[AndyFielder]

link for the place?

could do with a matching set for the new wheels.... if they ever arrive!

[MAXIBOY]

i fancy the stud conversion with some titanium wheel nuts

[summeh]

umm stud conversion for the cup could be handy. will have a look on tweeks.