throttle bodies

[setb]

what kind of preformance will I get when I put throttle bodies on my williams phase1 with light tuned engine ?

[MAXIBOY]

up to around 220bhp 230bhp with head and cams and correct mapping

[evouk]

and about a 3k bill!!! :D

[ballcrusher]

with light head work 220/230 bhp dont be silly

[MAXIBOY]

with light head work 220/230 bhp dont be silly

read me answer. i said with head cams and mapping 220bhp 230bhp. no point putting expensive bodies on before head and cams in my opinion.

[ballcrusher]

well that aint what the guy asked about so with bodies ya looking about 200bhp-ish if its mapped wright

[MAXIBOY]

says with light tuned engine. in my opinion head and cams are a light tuned engine. suppose its open to interpretation

[Fusionrs]

Id consider mine as lightly tuned -

TBs
Catcams
APD head


......no silly big 300bhp turbos here

[finlay]

Id consider mine as lightly tuned -

TBs
Catcams
APD head


......no silly big 300bhp turbos here

what kind of power/performance is yours putting out ? cause thats the route i m taking in the near future, but i m putting in steel internals, should rev to around the 9000 mark with cams to suit

cheers Finlay

[dimkais]

If you want to rev above 9k then you will have to put in VERY wild cams (more than 300deg),but in order to do something like that you will have to make many changes to the head.Also, if you keep the std stroke you will never see the revs exceeding the 9400 as the stroke is not helping skyhigh revving at all.BUT....if you do these changes you will have more than 250hp