does any one know where you get the oil feed from for the turbo and where the return goes also if there is a high pressure oil pump normally used thanks
does any one know where you get the oil feed from for the turbo and where the return goes also if there is a high pressure oil pump normally used thanks
T off and take a feed from the pressure warning sender, and return to the TDC dowel hole at the base of the block front near the flywheel.
Can you point out the TDC dowel hole on this pic?
is this sensor the one at the front or the one at the back
Both on the front.
-edited-
What I just posted here is now irrelevant.