On my valver, the badge on the rear is the gay one off a phase 3 can i get a replacement badge ? also there is a hole in the boot where the old badge should be fitted as the gay looking on is too far over ...
On my valver, the badge on the rear is the gay one off a phase 3 can i get a replacement badge ? also there is a hole in the boot where the old badge should be fitted as the gay looking on is too far over ...
picture of the badge
I removed that gay 16v badge to find a hole under it !
looking in the haynes manual it shows that the clio badge should be mounted in this
argh gay phase 3 clio badge !!!
you can get a replacement from Reno... or try the scrappy prolly cost u 50p.
I may have a spare badge Allan
if i take that gay badge off will it have a hole behind it too ? and should i be able to put the standard badge back on easily ?
although if i get it painted i will get it debadged i think
i reckon mate that if you take the gay CLIO badge of there wont be a hole under it(cos who is gonna take the original(and best) clio badge of the car and put the gay one on and drill a hole for it when it can just as easily be stuck on!
CLIO WILLIAMS 0215