Mine seem to be getting a bit tired in their old age and not really squiting very high up the windscreen, what would need replacing, is it the pump or the little jets themselves?
Cheers
Danny
Mine seem to be getting a bit tired in their old age and not really squiting very high up the windscreen, what would need replacing, is it the pump or the little jets themselves?
Cheers
Danny
it's usually dirt or that they have moved slightly... i used to use a pin on my XR2 to adjust them
they point in the right direction but are just not very powerful!!! Ill try the pin thing though to clean them!
yeah, it will be just dirt m8, give it a go with the pin, it worked for me anyway... not tried it on the Willy, although the back one is tripe on mine... lol
my back one doesn't even spray water, but you can hear the pump trying when you hold it back, will that one be blocked too do you think jebus?
Try blowing up the pipe with compressed air.
Mat.
Mine started doing fack all Danny after I had my new 'screen in. I disconnected everything and checked the pumps. Then I blew down the pipes. When I reconnected everything they were powerful as fook!
will have to give that a try too then, is it an easy job then to take the pipes off and clean them out?
Danny
Just unclip the plastic scuttle, turn it over and disconnect the washer pipe from the pump. Then just blow hard!
flippen heck, might get the girlfriend to do that bit....thats her job!
To disconnect the shuttle is it just clips of is there any bolts?