Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1

    Fitting a strut brace

    I recently purchased a strut brace of ebay, it didnt come with any fitting instructions are bolts :(

    Can i just use some bolts from local car shop or do theyhave to be a speacial part form the maker of the strutbrace?

    Also do i have to relocate anything as the ingnition module seems to be in the way?

    is there any guides on here?

    any advice would be great

    thanks

  2. #2
    Forum User TriO`'s Avatar
    Join Date
    Jun 2005
    Location
    Gearbox fixed! suspension fixed!
    Posts
    856
    not sure about the bolts but i think you can just turn the ignition module upsidedown to get it out of the way.

    been meaning to fit mine for about a year now lol

  3. #3
    Forum User pat_986's Avatar
    Join Date
    Jan 2006
    Location
    Oxford
    Posts
    315
    Most come with a plate that goes onto the coil pack hangers, then you just bolt on the coil at the bottom of the plate.

    As for the bolts, Normally they come with 'self tapping' bolts...they are about as much use as a chocolate fire guard, You just want some decent grade bolts.

    However, strut brace's sometimes are fitted just for 'look' and some people feel they do very little, Because of this sometimes the self tappers will do.

    I have one on my Valver and notice VERY LITTLE difference once fitted, Mide you I have a sunroof that is not helping anyone!

  4. #4
    Forum User lumoxs's Avatar
    Join Date
    Oct 2006
    Location
    Falmouth - Cornwall
    Posts
    297
    i'll be doing a how too guide soon as i'm fitting mine this weekend

  5. #5
    Forum User snowman's Avatar
    Join Date
    Oct 2006
    Location
    Bristol
    Posts
    1,395
    Ive got a polished strut brace but im wary of fitting it as ive heard they can help crease your roof by the sunroof???

  6. #6
    Forum User lumoxs's Avatar
    Join Date
    Oct 2006
    Location
    Falmouth - Cornwall
    Posts
    297
    not heard that before mate

  7. #7
    Forum User number1's Avatar
    Join Date
    Sep 2004
    Location
    falmouth, cornwall
    Posts
    1,051
    my last valver bent the roof by the sunroof, caused it to start leaking, havent got one on my latest and the roof leaks anyway, time to fit a brace then lol

    Dave

  8. #8
    Forum User snowman's Avatar
    Join Date
    Oct 2006
    Location
    Bristol
    Posts
    1,395
    Do the front struts have to be removed to torque up the fixings,dont fancy this self tapping nonsense?

  9. #9
    Forum User lumoxs's Avatar
    Join Date
    Oct 2006
    Location
    Falmouth - Cornwall
    Posts
    297
    i'm going to drill 3 holes, and use nuts and bolts to tighten up - as K-Tec suggested

    @ dave

  10. #10
    Forum User
    Join Date
    Oct 2006
    Location
    wallinton car:1.8 16v
    Posts
    63
    i had to drop the coil pack bit usin tht bracket sum1 sed about and turn the other bit upside down.
    i just used these screws tht are like self tappers but are alot fatter and have flat tops so act like they have washers, if your quick TLCs wholesalers have free sample packs on there counters but this was a cuple of weeks ago!


 

Similar Threads

  1. Strut Brace
    By raviedavie in forum Wanted
    Replies: 3
    Last Post: 16-09-2009, 17:44
  2. Strut brace
    By Collier in forum Wanted
    Replies: 0
    Last Post: 06-03-2009, 13:50
  3. How do I fit a strut brace?
    By spadey in forum Mechanical
    Replies: 4
    Last Post: 21-08-2007, 21:49
  4. Strut Brace...??
    By freebone16v in forum WilliamsClio Discussion
    Replies: 6
    Last Post: 16-01-2007, 14:01
  5. Strut Brace
    By gonch in forum Items for Sale
    Replies: 3
    Last Post: 09-12-2005, 22:10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •