im stuck doing pas pump advise needed

[wavy]

iv been at this all day now im stuck
iv removed bonnet- grill -alternator -head light and moved rad to side allowin alternator out

iv removed the 3 bolts holding the pulley to the pump(had 2 drill 1 out)
removed the pulley
removed the 3 bolts going in to the front of the pump
but it is still solid
where/what do i do now
i think there is 2 more bolts at the back of the pump
but how do i get to them
does the cylinder head have to come off ?

i can see both the pipes leading to the pump
iv losened the jubali clip and losened off the metal pipe but the pump is still solid

any ideas please

[Coops]

ai theres one more bolt at the back of the pump mate, best bet is to rip out the rad n that n get a clear shot at it! or see if you can loosen the big fook off bolts holding the bracketry for the psp onto the front of the block, if you can pull that away a bit shud get to that bolt easier!

[wavy]

im hoping that the 13mm bolt i can see behind rad its holding a small bracket on front of the engine will allow me some access or movement with the back of the pump so i can remove it some how ?

or :(
a friend called and had a look and said it looks like im gonna have to remove a huge brackety looking part that covers most of the side and is attached all over plus remove the tensioner wheel iv no idea what or how that is attached so im realy hopin i dont have to remove the huge brackety type side of the engine

is it nesasery to remove all the side ?
thanks