Suspension - Springs

[Rudders16v]

When i bought my Williams it was already lowered, either 35mm or 40mm. I want to change it so it's a little higher as the cat keeps catching on speed humps. Does anyone do any springs which will only give about a 15-20mm drop?? If not, it'll be back to standard springs but i'd prefer it to be slightly lower than standard, thanks

Oh, and if anyone has got some standard springs kicking around which they want to sell, let me know. Normal 16v springs are also the same aren't they??

[Rudders16v]

Anyone know of any springs then?? I really need to get these ordered today or tomorrow if poss cos i want to get the car into the garage on Friday to have them fitted at the same time as the new bearings going in on the suspension legs

[FlamingMonkey]

I'm putting standard springs on my Willy at the weekend, the ones I have are 172 springs which I'm told are the same if thats any use

[Mark_Ritchspeed]

Yep 172 springs are identical, same ride-height and both are rated to 125lbs. I do have a set off a low mileage 2001 172 which are available for £30 inc p+p.

[FlamingMonkey]

Yep 172 springs are identical, same ride-height and both are rated to 125lbs. I do have a set off a low mileage 2001 172 which are available for £30 inc p+p.

^^ Good price that, Renault want 70quid a spring for new Willy ones.

[Mark_Ritchspeed]

I can get a set of custom springs made up to any spec and delivered for @ £100 all in last time I checked . Does take a couple of weeks for the springs though.

[Rudders16v]

Mark, have pm'd you