View Full Version : Bastard Cunt Bitches
Woke up to this today
http://www.cliosport.net/forum/showthread.php?t=125196
:cry: gutted for u fella, is there much body damage?
cracked paint around the lock, door bent slightly near the lock.
Tempted to get it de-locked now
yer i would dude, how far are you from tamworth? my dad does de-locking
cheap too
:(
Shitter i would, clios are so ****ing easy to break into, pop lock out, pull rod and you are in.
Did you have an alarm?
If they didn't take anything else they had abvously seen it, maybe you getting something outa the boot, and just gone straight for that
No alarm currently, it sitting in my room waiting for me to get enough cash to fit it...
The glovebox was open but nothing taken from there, also headunit cover was up when i know i put it down.
Poss did see me take stuff from the boot yesterday, it a quiet ish area which is bizzare... plently more more expensive cars around :cry:
ahhhh that has to be the worse feelin in the world.... mine got done over and now my back seats r bent in the middle where they pulled em forward... mine de-locked wiv an alarm that cost me £400 so hopefully my stuff is safe now....
yer i would dude, how far are you from tamworth? my dad does de-locking
cheap too
Live in notts so a bit of trek, how much we talking?
My theory is if my car is strripped with no interior etc and looks like a dirty piece of shite, no one bothers cus tehre is blatently nothing worth anything in it :)
true, its not like my car is an attention seeker tho :roll:
Unlucky mate. There are some real pieces of shit about.
unlucky mate!thats ****in shitty.
had same happen to me few years ago, was followed in hull from a retail park, car earmarked n next morning popped lock, no steroe, half a dashboard and no sub 6X9's or parcel shelf and they ripped the amp off the back of the seat ****in that n all. was not a happy bunny and mr plod did sweet fa for me! :evil:
why the fook cant people cut this shit out, it aint right, u dont **** with another mans automibile, u just dont do it
Dancliovalver
27-02-2006, 16:47
My theory is if my car is strripped with no interior etc and looks like a dirty piece of shite, no one bothers cus tehre is blatently nothing worth anything in it :)
lol thought i was the only one that thought that :wink:
Yup nowt to steal in my car.....good job really!
yer i would dude, how far are you from tamworth? my dad does de-locking
cheap too
How much mate? I'm in Stafford so Tamworth isn't far really.
unlucky fella. if your going to have ICE in your motor the you should stick razor blades so they stick out of the sides of your sub box.
wait for the little pricks to pick it up then eh. and when they do run off with less fingers than they arrived with :lol: you can get the blood tested for a DNA match.
chances are the scum have been nicked before...
was followed in hull from a retail park
Where abouts in Hull?
Im from there originally
Andyvalver
27-02-2006, 19:23
:( Unlucky mate, ie had that happen to me in the past so i know how you feel. Fookin cunts :evil:
Mish_16V
27-02-2006, 19:59
Sorry to hear this matey, just read on RB. No exactly how you feel Dave as it happened to me, they took my lifetime collection of CD's (me being a spacca was moving house at the time and had popped to work in a mates car in the morning, leaving mine outside the house) my headunit, a £100 jacket and even my suit jacket for work and ****ed my door lock.
Makes no difference though, the value of things...whether they get in or not they are low enough to try and deserve to gag on there own bollocks
aye, well ive just bought the stuff to delock the car...
will start it early 2morro morning :)
Clio_GTT
27-02-2006, 20:48
aye, well ive just bought the stuff to delock the car...
will start it early 2morro morning :)
weld a metal plate in, don't skim it, it'll just sag
not skimming, glue welding a metal plate either side of the recess. Then skimming with filler and painting
="RSi Dave"]not skimming, glue welding a metal plate either side of the recess. Then skimming with filler and painting
Best way. The heat from welding distorts the panel.
Clio_GTT
27-02-2006, 22:56
one lesson i've learnt is, you can't have anything nice these days without some scum trying to nick it, i had my rear window seal cut off and the window took out to steal my ice
Scott-16v!
27-02-2006, 23:06
fukking hell mate, thats a bitch. too many scummy shits about these days, even in the quiet areas :x
progress so far...
1. Lock removed
2. Area Sanded down
3. Metal plate glue welded in place (used araldite metal glue)
4. Filler Skimmed over the top
5. Sanded down filler
6. Filler reskimmed to sort out imperfections
7. Filler sanded down again
Still to come...
1. Filler skimming again (still not amazing)
2. Sanding again
3. Primer
4. Sanding
5. Paint
6. Sanding
7. Paint
8. Laquer
Here is how it looks at the moment, ive only done the drivers side aswell LoL
http://www.zen32679.zen.co.uk/28022006.jpg
Take it you didn't dish teh sides of the lock hole?
You will need to leave the filler ever so slightly pround, or you will see the outline of the lock hole, spent ages getting it right on my bonnet when i smoothed that
Dan_Williams
28-02-2006, 15:14
yer i would dude, how far are you from tamworth? my dad does de-locking
cheap too
still not had my quote for it lol
was followed in hull from a retail park
Where abouts in Hull?
Im from there originally
got followed from kingswood asda mate i reckon back up beverly road to the xroads with cottingham road. well just before there neway! used to live on wellesley avenue. u know it?!
Coops
hey dude sorry i didnt reply didnt follow the thread
if u want a quote on de-locking then see the WHITE STAR AUTO ENGINEERING thread in general chat all contact details are there
been followed a couple of times, piss easy to loose the cunts tho, esp when you know the roads :twisted:
Take it you didn't dish teh sides of the lock hole?
You will need to leave the filler ever so slightly pround, or you will see the outline of the lock hole, spent ages getting it right on my bonnet when i smoothed that
Nope, did that...
it wasnt completly flat as they screwed one side in, so just pushed the other sides in aswell... should looks really flush once sorted.
Coops, i dont know your road however know kingswood and cott road... I used to live in Cottingham, my parents live in willerby now.
http://www.zen32679.zen.co.uk//Fixed/01010039.JPG
http://www.zen32679.zen.co.uk//Fixed/01010040.JPG
http://www.zen32679.zen.co.uk//Fixed/01010041.JPG
Looks liek you got a bit of orange peel there fella, nowt a bit fo wet and dry can't fix tho ;)
its metallic and its not been laquered yet...
Should i wet n dry before laquering metallics?
If its got orange peal, sand it down flat with 2000 grit wet and dry and then do a quick mist over again before laquring, if there is orange peal under the laqure you'll never get rid of it, without respraying it
ill check in the morning... however that could be the camera... it pixelates things quite a lot
if you are getting orange peal you are holdng teh can too far away/moving it too fast, the paint shoudl hit the surface, run together and then dry before it runs down, fine fine line
yeah... possibly, im hardly spraying in ideal conditions :roll:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.