View Full Version : gearbox fit
black williams
21-01-2006, 17:07
do i need to take the engine out to fit need box and is it a easy job to do
would i need help
MatBrown
21-01-2006, 17:09
Easier with the engine out.
Mat.
black williams
21-01-2006, 17:16
is it a hard job tho in all as never tryed to do a big job before
James Clio 16v
21-01-2006, 18:44
Not overly difficult. Just make a note of where everything goes, label up wiring etc and even take pictures and you will be fine.
I'd never done anything like this before and I did a Williams coversion on my 16v a couple of months ago and everything was fine.
Good luck
James
black williams
21-01-2006, 21:32
thanks for advice mate will prob give it a go if i can get a box
i find it easier to remove the subframe, take the weight of the engine on a crane and then just drop it slightly. means you don't have to disconnect everything. But thats just my personnel preferance. Good luck :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.