View Full Version : device behind rev counter??? - FAO matt brown ???
remember sum 1 sayin few weeks bk that my rev counter stops workin and then starts agen cuz sumthin behind the needle needs changin....
dont suppose uv got a picture of it have u matt?....i take it u have gota take off the white back 2 the clocks 2 get 2 it?
Will be the actual dial unit i guess
Another set of RT dials you can swap them from are peanuts
Will be the actual dial unit i guess
Another set of RT dials you can swap them from are peanuts
wen u say unit tom u mean the block that houses the rev counter, speedo pety gauge etc?....all that will need replacin?
Nah if you take the dials out and take hte unit apart each guage unscrews seperatly, so just the rev counter
Justin..
15-01-2006, 23:49
Nah if you take the dials out and take hte unit apart each guage unscrews seperatly, so just the rev counter
doesnt the rt only go up to 7k tho not 8k?
so im gona need a rev counter face basicaly? and needle of course lol
Yeah hadn't thought if thast, you'll need a compolete valver rev counter
Clio_GTT
16-01-2006, 19:44
you'll need one of these:
http://www.rtoc.org/library/file.asp?id=27848
let me know whether you have the clear or orange lense on the back of your dials and i'll sort you one out for gratis
^^^^ just a blank page m8.....
ill need a willy2 rev counter.....if i can use bits from a valver 1 though (not the face) then ill just need 2 kno which bits as i alredy have a spare set of dials....well geezer dus :D
Clio_GTT
16-01-2006, 23:23
^^^^ just a blank page m8.....
ill need a willy2 rev counter.....if i can use bits from a valver 1 though (not the face) then ill just need 2 kno which bits as i alredy have a spare set of dials....well geezer dus :D
hmmm maybe locked to non members :( its the bit behind the dials, piece of piss to take out and fit mate, i'm sure you can use the 16v ones as i have willy dials in my 16v. I've already got a good en ripped out of a set of dials and i'm based in brum, so you can have it free, heck i'll even fit it for ya, saves you butchering the other dials mate.
^^^^ just a blank page m8.....
ill need a willy2 rev counter.....if i can use bits from a valver 1 though (not the face) then ill just need 2 kno which bits as i alredy have a spare set of dials....well geezer dus :D
hmmm maybe locked to non members :( its the bit behind the dials, piece of piss to take out and fit mate, i'm sure you can use the 16v ones as i have willy dials in my 16v. I've already got a good en ripped out of a set of dials and i'm based in brum, so you can have it free, heck i'll even fit it for ya, saves you butchering the other dials mate.
nice 1 m8....think my m8s gona butcher them anyway, have a little play with em like :wink: if i av any trouble though m8 ill let u kno! :P
^^^^ just a blank page m8.....
ill need a willy2 rev counter.....if i can use bits from a valver 1 though (not the face) then ill just need 2 kno which bits as i alredy have a spare set of dials....well geezer dus :D
hmmm maybe locked to non members :( its the bit behind the dials, piece of piss to take out and fit mate, i'm sure you can use the 16v ones as i have willy dials in my 16v. I've already got a good en ripped out of a set of dials and i'm based in brum, so you can have it free, heck i'll even fit it for ya, saves you butchering the other dials mate.
If Ill Moves doesn't take it I will. My rev counter doesn't rev past 3k as from 30 mins ago :cry:
Justin..
17-01-2006, 00:39
:shock:
:shock:
Don't worry it bangs off the limiter. Just shows 3k rpm.
Justin..
17-01-2006, 00:44
ooh
go 4 it big hp, iv got the part i need here i think, if not ill just contact mr brown 8)
no1 got any pics then? :(
Clio_GTT
17-01-2006, 18:31
http://photobucket.com/albums/f360/Clio16v-widetrack/?action=view¤t=5842401f.jpg
big hp where are you based ?
wots that a picture of? ^^^^
lol :oops:
http://photobucket.com/albums/f360/Clio16v-widetrack/?action=view¤t=5842401f.jpg
big hp where are you based ?
Aylesbury Bucks mate.
Clio_GTT
17-01-2006, 19:38
wots that a picture of? ^^^^
lol :oops:
Its the bit you need to replace, the dial face sits on top of this and the needle goes on the middle pin bit. all you do is unscrew it from behind the dials and remove it.
would have to post it to bucks mate, unless you wanna collect it lol
Is it easy to fit? Don't wanna trash my blue dials doing it.
Is it easy to fit? Don't wanna trash my blue dials doing it.
dito lol
Clio_GTT
17-01-2006, 20:06
Very easy mate, just make sure you put the needle on in the right place and you can't go far wrong.
Whats your postcode willy lover? I know its Birmingham but its a big place :lol: May have a drive up and collect it. (unless its silly miles)
thanks for all ya help Willy Lover!!! uv made it alot clearer now :D
ill let u kno how i get on with it all!
Clio_GTT
17-01-2006, 20:29
Whats your postcode willy lover? I know its Birmingham but its a big place :lol: May have a drive up and collect it. (unless its silly miles)
can maybe meet you part the way there, its B90, south birmingham, M42 jct 4
71 miles from me. Prob be easier to send it mate.
How much?
Clio_GTT
19-01-2006, 17:48
71 miles from me. Prob be easier to send it mate.
How much?
whatever postage is, doesn't weigh that much. i'll get a price and let you know
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.