View Full Version : WILWOOD 4 POTS
VIPERONE
03-01-2006, 01:25
what are the bore sizes and disc width?? ie
1.75" 44.5mm 1.25" 31.8mm is a measurement from the website...
From Rally Design I guess. Bore width I believe is Master Cylinder and cannot find this in Haynes Manual. Disc width should be in there, its in car at mo so I can get to check but no help without the master cylinder bore.
check wilwoods website mate.
err iirc disc width is about 21/22mm might be wrong but mine are worn in now lol no idea on piston bore and im not stripping them down to check lol
VIPERONE
04-01-2006, 00:15
reason being i can get 2 brand new for £112 just need to know the correct diamentions
cool, ive let bayliss know as he has some dynalite 4pots sat at home now, mine are on the car!
it's about 32mm size of piston measuring with ruler so i'd say the 31.8mm ones GG
I was after some midilites. Anyone sorted out mounting brakcets for these calipers?
ritchspeed can sort brakets out mate. Mention us and get a nice discount.
Ritchspeed is on our links page.
Wasn't sure if Mark just did the kits rather than brackets by themselves. Will ask.
yeah he does the brackets and everything, its just trying to get hold of him thats the problem :lol:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.