View Full Version : Help with bucket seats!! calling Martin, Lunner etc...
debottomley
22-12-2005, 12:36
Just purchased some corbeau sprints with universal side mounts.
Do I have to drill and tap new holes in the floor to accomodate the mounts as they clearly dont mount onto original mounts as they are too thin lol
pics any advice would be much appreciated ASAP
thanks all
Most people who have universal side mounted seats have drilled through the floor and use bolts - Easy
I used to have omp seats which had specific clio subframes which bolt into the standard mounting points
only thing is with universal mounts you might not be able to get the seat back into the original position.
When i did my cobra imolas (same as martin, and wot winston used to have) they came with universal side mounts. I used the original mounting places on the floor plan. Just had to elongate or drill a few new holes. This meant that they were still bolted onto the stiffer bits rather than straight thru the floor! (if you know wot i mean) Difficult to decribe!
Pics :
http://x12.putfile.com/11/32408075171.jpg
http://x12.putfile.com/12/35507143758.jpg
i did the same as stew, but i fitted a bit of metal re-inforcement just to be on the safe side, as the original mounting holes are a bit thicker and the rest of the 2 'strips' are a bit thinner! (as you can see in the first pic)
i fitted some sliders too just on the drivers, cos i know they'd be wrong after driving 2 miles lol!
just need to figure out where to put the inside harness bolts to now! im thinking through floor with reinforced plate behind it! need to find some daylight to take a good look!
and it was foooking freezing last weekend, hence the gloves and full thermals on hehe
http://homepages.nildram.co.uk/~cadams/images/tbclio/stripped/seat3.jpg
http://homepages.nildram.co.uk/~cadams/images/tbclio/stripped/seat5.jpg
http://homepages.nildram.co.uk/~cadams/images/tbclio/stripped/seat6.jpg
http://homepages.nildram.co.uk/~cadams/images/tbclio/stripped/seat.jpg
I have custom bottom mounts
http://www.lunner.co.uk/RSi/Seats/slides/CIMG1043.JPG
As you can see sealtbelts mount to where the orignal runners were
http://www.lunner.co.uk/RSi/Seats/slides/CIMG1171.JPG
http://www.lunner.co.uk/RSi/Seats/slides/CIMG1170.JPG
lunner mate, did u just bolt the harnesses through the OE inside holes and a nut underneath?
cheers
Aye, through teh holes and i think i mgiht have used a washer too
mine use tailor made clio frames, not quite tailer made as i had to drill n alter them lol :lol:
I have custom bottom mounts
http://www.lunner.co.uk/RSi/Seats/slides/CIMG1043.JPG
As you can see sealtbelts mount to where the orignal runners were
http://www.lunner.co.uk/RSi/Seats/slides/CIMG1171.JPG
http://www.lunner.co.uk/RSi/Seats/slides/CIMG1170.JPG
lol, in my stripped RT, i had a bottle of water in the exact same place!
LOL....things fly around the back, and i guess it just ended up there lol
POWARTEK
26-12-2005, 19:20
you get it sorted daz?
yep saw him out and about over christmas....looks like hes done a good job.
Will let him post the pictures up when he's back on !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.