View Full Version : Dogbone mount mod
James Clio 16v
18-12-2005, 20:06
I remember reading that you can modify the dog bone mount by knocking out the rubber bit, but I can't remember exactly how to do it.
Can somebody please tell me.
Thanks
James
You rotate the rubber bit 90 degrees
James Clio 16v
18-12-2005, 22:15
Clockwise or anti-clockwise?
Or doesn't it matter?
it dont matter which way!
James Clio 16v
18-12-2005, 23:14
Thanks
Justin..
19-12-2005, 01:26
whats the idea in that then?
the std dog bone mount has the rubber connected to the pin in 2 places....at the top n bottom...the engine moves them from side to side...so if u turn the rubbers 90 degs u stop the movement in the rubber cos now the gap that was empty b4, now has rubber there to stop it moving
kinda lol
the 1.4's is solid rubber.
You can fill the 16V one with tiger seal which also stiffens it up nicely.
MatBrown
19-12-2005, 11:24
the 1.4's is solid rubber.
You can fill the 16V one with tiger seal which also stiffens it up nicely.
Are they the same shape as the 16v one or would you need to swap the rubber bits over?
I did have a solid one but the part number on it was the same as the standard one so couldn't trace it.
Mat.
same(ish) its slightly curved but fits.
MatBrown
19-12-2005, 13:21
Yeah, sounds about rite, do you have the part number?
Mat.
no part number, just go ask at the factors for a 1.4's.
any 1 got any pics or a guide 4 this?
sounds like a plan but havnt got a clue wot 2 luk 4 :oops:
http://img455.imageshack.us/img455/2488/dcp08569fx.jpg (http://imageshack.us)
LOL im so shit at sizing pics!!! thats actually quite scary.....a monster engine mount!
anyway this is one i used on mine...modded by filling in the gaps with the same adhesive used to bond fighter jet windscreens (or wotever they are called!). its very stiff and is far better than standard. (thanks to Neal16v www.retro-renault.com)
whats the stuff called that you used ?
its similar to tiger seal
Thats what anyoen can use, black tiger seal.
James Clio 16v
20-12-2005, 13:31
Where can you get Tiger seal from?
any factors/ body supply place.
cool, i can get some Tiger Seal through work
Mark Ritchspeed used to/does use polyurethene sealant
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.