View Full Version : Alloy Fitment
Iv found some wheels on ebay that I want but not sure what fitment size I have on the clio.
These are the wheel size
Stud Diameter: 100
Rim Width: 7J
Offset: 25
Number of Studs: 4
Would these wheels fit on my car?
Cheers.
clio's are pcd 100
J6.5
Et 36 to 38 iirc
and 4 stud
using valver ph2's
williams are either j7.5 or 7 cant remember which.
so only thing would be those have the wrong offset, so spacers needed
nice one cheers mate, ill place a bid then!
Scott-16v!
08-12-2005, 17:21
aren't phase 2's 7j or 7.5j aswell?
nope they are not as wide, but it doesnt make much diff the tyres still fit all the same, just look a little thinner
nope, with a 25 offset they will be further OUT, so a spacer would make it worse
you would be lucky for them not to rub
ah oopz thought it was the other way around :S
Grind the hub down ;)
Just asked the bloke whos selling the wheels, he says -
"The centre bore is 60mm on a clio which is slightly larger than the the bore for a VW etc by about 2mm"
Does this mean theyre not going to fit?
Scott-16v!
08-12-2005, 22:13
yes at the moment, but you can have the centres bored out, i found the same problem when i was looking at some bbs split rims.
these are not gonna fit mate because of the offset !
BOLLOCKS!!!
Ill have to keep looking then,
Cheers for your help
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.