PDA

View Full Version : Vacuuming!!


Coops
07-12-2005, 23:23
okay, heres my dilemma! whats right, one or two vacuum pipes on the end of the inlet manifold?! :?

http://i14.photobucket.com/albums/a330/coopahstar/PC070011.jpg

ONE?

http://i14.photobucket.com/albums/a330/coopahstar/PC070014.jpg

TWO?

...................
MatBrown
07-12-2005, 23:51
Both!

The one with only 1 vacuum pipe on the end will have an extra one halfway down facing the engine.



Mat.
Coops
07-12-2005, 23:58
so is 1 phase 1 n 1 phase 2 or summit, n i guess if i took one with one pipe off my engine will have to use that one when rebuild?!
Coops
08-12-2005, 00:01
oh n u get me pm about cam belt cover mat mate?
Mattie
08-12-2005, 11:10
wot are we lookin at? :oops:
Chris H
08-12-2005, 12:46
vacuum take offs on the end of the manifold. the top manifold (yellow) has a single feed for the MAP sensor.

The 2nd manifold has the pipe for the MAP sensor and another for the charcola canister.
jtrenaultuk
08-12-2005, 13:23
one is phase 2 and the other phase one, the one with 2 at the end is 1 and the other is 2 8)
Swervin_Mervin
08-12-2005, 14:01
Did ph2s not have charcoal canisters then?
Chris H
08-12-2005, 14:24
yes they did have charcoal canisters.

Some had the vacuum come off at the top[ of the manifold others a t piece and others had the 2 at the side.
Mattie
08-12-2005, 14:37
ahh i can see now :D
Coops
08-12-2005, 18:29
so i can use the silver manifold n just cover the hole up then if i aint using it?!i was gonna use the original but that means i gotta strip the paint off to start n cant b arsed!!

cheers people!

Coops
Chris H
08-12-2005, 19:00
yes.

renault even make a wee cap for this purpose

77 00 711 847 BLANKING COVER .52 ---3 x 1
Coops
08-12-2005, 19:05
cheers chris! u seem to know ur part numbers so heres one! i need the 2 blanking bolts that go into the end of the cylinder head near the stat housing! i have 2 sensors there, one temp and one other one, but with them there my airbox dont fit right!

cheers

Coops
Chris H
08-12-2005, 19:20
the sensors are the ctsa dn dash temp gauge sender.

Do you have the later stat housing to accomodate them?
Coops
08-12-2005, 19:53
yeah mate, nowt on the wiring loom was attatched to em! so am gettin rid of em and want the holes blankin off! :D

cheers

Coops!
Chris H
09-12-2005, 16:49
erm it won't run anywhere near right and the temp gauge won't work if nothing was attached to em.

I cannae seem to find them on dialgoies either at the moment!
Coops
09-12-2005, 18:31
i have the new stat housing! the car was running fine! all i need is the part number!!! :D
MatBrown
09-12-2005, 23:08
oh n u get me pm about cam belt cover mat mate?

Yeah, but it didn't make sense. :?



Mat.