BRUN
07-12-2005, 16:22
tried my impact driver that i bought which made light work of the other 3 bolts, but the 2 that were rounded off were another story
out comes my black and decker wizard (dremel thing)
i managed to cut a slot in one of them, and using the impact driver with a flat head bit, i managed to unscrew it out
http://i5.photobucket.com/albums/y186/mbrunskill/slot.jpg
tried that with the other one and the head of it kind of fell to pieces, arse
anywayz, i just attacked it, and 3 cutting discs later i managed to cut away all of the head of it
off comes the stat housing, mole grips didnt seem to be able to hold the bit that was sticking out very well, so i used the wizard again and cut a slot in it, out it came easy as pie
http://i5.photobucket.com/albums/y186/mbrunskill/slot2.jpg
so, ive now got a proper stat in, instead of the low temp one
out comes my black and decker wizard (dremel thing)
i managed to cut a slot in one of them, and using the impact driver with a flat head bit, i managed to unscrew it out
http://i5.photobucket.com/albums/y186/mbrunskill/slot.jpg
tried that with the other one and the head of it kind of fell to pieces, arse
anywayz, i just attacked it, and 3 cutting discs later i managed to cut away all of the head of it
off comes the stat housing, mole grips didnt seem to be able to hold the bit that was sticking out very well, so i used the wizard again and cut a slot in it, out it came easy as pie
http://i5.photobucket.com/albums/y186/mbrunskill/slot2.jpg
so, ive now got a proper stat in, instead of the low temp one