View Full Version : get as much out of it as i can
alreet boys n toys.
My car runs about 137bhp, give or take a horse or two as it is 10yrs old.
I was to get as much out of the valver as poss, so what do i need? and the round about retail price
a superchip?, straight thru exhaust?
list all the things plz lads
Cheers
de cat, panel filter, full exhaust, chip. anything else above this will cost £££ and apparently isnt worth the outlay on the 1.8. ie, cams, headwork etc u dont see the gains that u do with the 2.0 and isnt worth the cash.
yeh best thing you could do is drop a megane block in there. can get um for about 500quid i think ?
failing that (cuz your a youngen)...
supersprint manifold (300quid) - ktec
decat (40quid) - ktec
supersprint straight thru centre section (90quid) - motorsportworld
rear exhaust: magnex (deeper sounding), scorpian (racey raspy sounding)
ITG panel filter (20quid) - motorsportworld
best and cheapest thing you can do is strip the car a bit:
get rid of the jack, spare wheel, wheel brace and cage
replace with a couple cans of tyre weld
get rid of the boot carpet
nice one summeh,
im gonna get all that i rekon, birthday just went, and just been paid so im loaded at the moment so im gonna go SHOPPING! :D
I'm gutted Summeh, i do better de-0cats than k-tec and they are £35 delivered, £30 collected.
Just give me a week or so to get them in, had to get the company to re-do the flanges cus they weren't up to my exacting standards :D
Shit sorry mate i forgot... was just listing what was on my car :)
I bought a decat off lunner for a mate, was a good job. cheap too.
service or replace:
plugs
dizzy cap and rotor arm
ht leads (kv80 or kv85)
fuel filter (10quid)
coil pack
BBPT www.bbperformancetuning.co.uk have a really good deal on at the moment for ignition components, think u get kv80 leads, plugs and dizzy/cap for about 60quid or summat.
While changing the above wont improve bhp, it will help to insure your engine is a better way to being healthy, less misfires etc.
haha thats wicked cheers summeh i'll print everything your suggested off and go shopping.
Got anything else in mind mate post it up
When i got my car gave it a proper good service and it was a hundred times better, literally replaced everything
well everything summeh has listed im ordering,
inc this! :D
http://img425.imageshack.us/img425/9234/fanimold0ks.jpg
3 questions.....
1. how much?
2. Where from?
3. have they got the same for the wiliams!?
:P
316.08quid inc vat
k-tec racing
yes they do
here is link :D
http://www.k-tecracing.com/show_product.asp?id=380
MatBrown
06-11-2005, 17:23
BBPT www.bbperformancetuning.co.uk have a really good deal on at the moment for ignition components, think u get kv80 leads, plugs and dizzy/cap for about 60quid or summat.
Looks like £100 to me.
http://www.bbperformancetuning.co.uk/products/product.asp?id=71297
Mat.
And there's a supersprint manifold on ebay at the mo.
Also don't go on your Valver being 137bhp as that is a factory quoted figure, and all will not have that. Plus over time youwill lose power through worn components.
Best thing you can do is check and replace where necessary all service items especially electrical related like Dizzy, rotor, leads and plugs and all filters. Also use of additives will help restore injectors and unclog a lot of the build up you get over years of motoring.
Only then will you be able to improve upon what is standard in terms of power.
And there's a supersprint manifold on ebay at the mo.
Also don't go on your Valver being 137bhp as that is a factory quoted figure, and all will not have that. Plus over time youwill lose power through worn components.
Best thing you can do is check and replace where necessary all service items especially electrical related like Dizzy, rotor, leads and plugs and all filters. Also use of additives will help restore injectors and unclog a lot of the build up you get over years of motoring.
Only then will you be able to improve upon what is standard in terms of power.
I reckon the majority of engines will still be putting out standard power. Only very ropey ones will be slower. :)
MatBrown
06-11-2005, 19:47
Depends entirely on what you use to measure it?
Mat.
the engine was rebuilt to factory standard two yrs ago so its pretty crisp
Justin..
06-11-2005, 20:58
sweeeeeeeeeet :D
Justin..
06-11-2005, 20:59
all horse play :?
316.08quid inc vat
k-tec racing
yes they do
here is link :D
http://www.k-tecracing.com/show_product.asp?id=380
thanks W-Jr! :D im gona start saving! lol
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.