View Full Version : Gear stick knob
Daft question time. Does the gear stick knob just pull off (maybe need pliers to get it to budge?) and a new one just pushes back on. I have a new one and it doesn't look like there is a screw thread or anything like that, so does it need a drop of lock-tight/glue or something when putting it back on? Is there anything I need to watch out for (using too much force?). Thanks.
ianbirch
29-04-2021, 11:02
Hi Lee...I've never changed one but from what I've read they are a push fit...but very tight so try not to smack yourself in the face when it does come free.
Regards Ian
Thanks Ian, I'll get a face guard!
I thought the same thought I'd pull off and replace. Ended up cutting off. Just made sure I didn't cut down to the metal. Probably been stuck down over the years
Thanks, I was thinking I might have to do that too (cut down to loosen it off). How difficult was the new one to put on?
New one was easy just pushed on
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.