View Full Version : Hydraulic clutch mk1
Has anyone fitted a mk 1 Williams with a hydraulic clutch, is it even possible, any info.
16v_paddy
20-06-2020, 23:41
Wouldn't be impossible but will most certainly be a ballache, off the top of my head you'd need an aftermarket pedal box with a master cylinder, run some pipework (pretty easy) fabricate a bracket to mount a slave cylinder to the box - may require some jiggery pokery with wiring & coolant pipes to make room for the slave cylinder & bracket - modify the clutch fork so the slave cylinder can push on it correctly and find a suitable slave cylinder that can push the fork by the correct amount
9583
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.