View Full Version : screws for plastic engine cover
maxwilliams
13-04-2020, 19:04
I have recently sourced a replacement engine cover but I haven't any screws.
Could anyone tell me which ones I need please? I have found this https://www.gsfcarparts.com/017vg0330 but not sure if it's correct.
Thanks in advance
ianbirch
13-04-2020, 19:43
Which engine cover do you mean... put a pic up.
If its the spark plug cover those are incorrect as they should be plastic and are no longer available, though you might be able to get them
from Youngtimers in france.
Regards Ian
maxwilliams
13-04-2020, 19:48
Which engine cover do you mean... put a pic up.
If its the spark plug cover those are incorrect as they should be plastic and are no longer available, though you might be able to get them
from Youngtimers in france.
Regards Ian
This bad boy https://youngtimersclassic.com/gb/clio-16swilliams/544-engine-cover-for-intake-manifold-for-renault-clio-williams-clio-16s-engine-cover-for-intake-manifold-for-renault-clio-williams-c-3760302433094.html
ianbirch
14-04-2020, 12:55
This bad boy https://youngtimersclassic.com/gb/clio-16swilliams/544-engine-cover-for-intake-manifold-for-renault-clio-williams-clio-16s-engine-cover-for-intake-manifold-for-renault-clio-williams-c-3760302433094.html
Sorry don't know the part number but it's a torx T20.
9497
9498
Regards ian
Jazzasingh
05-06-2020, 19:31
I think they are plastic. Watch on youtube salvage hunters classic car S04E02
They had some made using a 3d printer
16v_paddy
06-06-2020, 00:48
I think they are plastic. Watch on youtube salvage hunters classic car S04E02
They had some made using a 3d printer
I think everyone on here has seen that episode and spent a lot of time shouting at the TV :lol:
A guy on the facebook group has had them 3d printed as well but they are available from here https://www.boutique-bordanova-sport.com/pi%C3%A8ces-clio-16s-et-williams-origine/2-agrafes-visserie-origine/
ianbirch
06-06-2020, 09:25
I think they are plastic. Watch on youtube salvage hunters classic car S04E02
They had some made using a 3d printer
The original poster did not mean the spark plug cover, he meant the manifold cover and i have already shown the correct fittings.
Regards Ian
Ashley79
09-08-2020, 09:53
Does anyone have a spare one of these? I broked one 😂 Brittle little things. I looked on eBay and the site suggested. Bit prices to get from France at 15-20 euro postage. I like the idea of a 3D printer to make one
16v_paddy
09-08-2020, 21:07
Does anyone have a spare one of these? I broked one Brittle little things. I looked on eBay and the site suggested. Bit prices to get from France at 15-20 euro postage. I like the idea of a 3D printer to make one
Scroll through the site & see if anything else takes your fancy, I've been doing that on Bordanovasport and the youngtimers classic sites for a while now, I've bought so much stuff I had no idea I actually wanted or needed it's crazy :lol:
Ashley79
10-08-2020, 09:03
I have added a few things to the basket... I also bought a 3D printer so might just start making my only little bits when they break. good websites though. Have the heat shield and plastic screws etc. Will do the same and buy a few bits cheers.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.