BazEdgar
26-11-2016, 17:59
This started when I was changing the front discs...
On the drivers side, both disc screws had previously had their heads drilled off, leaving the rest of the screws in the hub. I know this isn't a big problem but I wanted the disc held on by at least one screw!
Anyway, so I could drill out the screws and re-tap the holes, I decided to take the hub off when this happened...
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8121&stc=1http://williamsclio.co.uk/forum/attachment.php?attachmentid=8122&stc=1
Any advice on getting the remains of the bearing out of the stub axle/off the hub? (besides cutting them off!)
Thanks,
Baz
On the drivers side, both disc screws had previously had their heads drilled off, leaving the rest of the screws in the hub. I know this isn't a big problem but I wanted the disc held on by at least one screw!
Anyway, so I could drill out the screws and re-tap the holes, I decided to take the hub off when this happened...
http://williamsclio.co.uk/forum/attachment.php?attachmentid=8121&stc=1http://williamsclio.co.uk/forum/attachment.php?attachmentid=8122&stc=1
Any advice on getting the remains of the bearing out of the stub axle/off the hub? (besides cutting them off!)
Thanks,
Baz